Wanted Brake stud thingy like this …..

[d8mok]

Looking for a brake mount like this.

It’s a round coin shape , with the three holes for the locating pin for the V brake. The stud appears to hold it in place and is separate.

 

[mdvineng]

3-Hole Plates for the brake return spring on V-Brakes

Replacement ring / Brake ring for all of our three piece brake bosses. It is laser from 1,5mm stainless stee, with 3-holes for the brake return…

brake-stuff.de

 

[d8mok]

3-Hole Plates for the brake return spring on V-Brakes

Replacement ring / Brake ring for all of our three piece brake bosses. It is laser from 1,5mm stainless stee, with 3-holes for the brake return…

brake-stuff.de

Yes I saw those ones but they dont appear to be round like I need. If all else fails maybe an option.

 

[ishaw]

Just buy two and you'll never know

 

[mk one]

Round but single hole, which is all you need technically

Pace Vintage RC35 Fork Cantilever Brake Spring Plates. Round Type. Steel. | eBay

<p>Pair of brake spring plates to fit the early type M6 threaded cantilever brake pivots as fitted to the Pace 1992/93 RC35 suspension forks. </p><br /><p>These are the round steel standard fitment version.</p><br /><p>Original unused parts with a little storage marking to faces. </p><br...

www.ebay.co.uk

 

[d8mok]

I’ll know. OCD will kick in. Likely the option I’ll end up with unless I make one.

Just buy two and you'll never know

 

[d8mok]

Still looking

Can be the same as the one linked above from Germany if anyone knows of a UK seller

 

[d8mok]

I’m gonna bite the bullet and order the ones from the linked German site above.

But I’ve just noticed that the brake boss is a different thread to a normal GT one (I’ve loads of spare ones from Zaskars/LTS )

Anyone know what thread it is for a 97 Xizang?

M10 x 1 is what the above German site says for 90-99 Xizangs

 

[d8mok]

Measured the thread pitch which is M10 x1.5.

Anyone have any in that size?

 

[mdvineng]

Defo not M10 x 1.25? 1.5 pitch is very odd for GT