futuristicoldman
Senior Retro Guru
- Feedback
- View
Im having a brutal thin down in the back room getting rid of all unnessasary stuff.
1990 (I think) Yeti fro in large, inc 1 1/4" headset and manitou 1 forks. The frame has just been freshly powder coated gloss black by triple s.
It was a bit shonky when I picked it up, theres a bit of pitting here and there, so is not being sold as a gleaming beacon of perfection although it is nice and shiny. The inside of the seatube is very clean and corrosion free. The frame is unstickered at present but replacements should not be too hard to find, I still have the headbadge which remarkably came off in one piece, you could probably re attatch it with the correct glue. All threads are tidy and the seat tube slot is in good nick.
Manitous are in good nick with clean stanchions, elastomers are intact but rock solid giving about 2mm of movement. I may be able to bodge a set of coils into them as a temporary measure if required, the correct elastomers can still be bought online.
I have a white turbo saddle that I can add for £20 if required to top off the package, its a bit scruffy but is perfectly usable, seems a shame to use anything else on an fro though.
£199 collected. £10 to post within mainland UK. Highlands and offshore will be a chunk more. It will be into the new year before I can post.
Happy xmas y'all
Size as follows....20" seat tube 595mm top tube
Ive tried to capture the surface pitting but my cameras flash makes it impossible to capture, you can just about make it out on the pic showing the underside of the downtube. I will try again in the morning when the sun is shining.
SOLD THANKS
1990 (I think) Yeti fro in large, inc 1 1/4" headset and manitou 1 forks. The frame has just been freshly powder coated gloss black by triple s.
It was a bit shonky when I picked it up, theres a bit of pitting here and there, so is not being sold as a gleaming beacon of perfection although it is nice and shiny. The inside of the seatube is very clean and corrosion free. The frame is unstickered at present but replacements should not be too hard to find, I still have the headbadge which remarkably came off in one piece, you could probably re attatch it with the correct glue. All threads are tidy and the seat tube slot is in good nick.
Manitous are in good nick with clean stanchions, elastomers are intact but rock solid giving about 2mm of movement. I may be able to bodge a set of coils into them as a temporary measure if required, the correct elastomers can still be bought online.
I have a white turbo saddle that I can add for £20 if required to top off the package, its a bit scruffy but is perfectly usable, seems a shame to use anything else on an fro though.
£199 collected. £10 to post within mainland UK. Highlands and offshore will be a chunk more. It will be into the new year before I can post.
Happy xmas y'all
Size as follows....20" seat tube 595mm top tube
Ive tried to capture the surface pitting but my cameras flash makes it impossible to capture, you can just about make it out on the pic showing the underside of the downtube. I will try again in the morning when the sun is shining.
SOLD THANKS
