Yeti Decal size

[hairstream]

I have a jpg of the yeti stencil type downtube and seatstay decals from Gil. He needs help sizing them (I have freshly powdered frames) and can't get the sizing for him. Can somebody with FRO/Pro Fro please measure the "print" part of the decals from top to bottom and left to right to help him size the actual decals he is doing for me? Thanks.... kev?

 

[Elev12k]

Dear Hairstream,

I measured the decals of my ProFRO

- Sizes are in cm
- With most decals there is clear around fonts or graphics. I spec both.

Yeti, downtube => 12.6cm wide/ 4.5cm high (actual decal!), 11cm wide/2.7cm high (fonts)

ProFRO, downtube => 6.4/2 (actual decal), 5.9/1.4 (font)

Yeti cycles, left seatstay => 2.9/9.5 (actual decal), 2/8.5 (font, where 'cycles' = 2cm wide)

Durango decal, seattube => 3.9 wide, 5.3 high (actual = graphic)

Tange decal, seattube => 4 wide, 3 high (actual = graphic)

Drifting Yetiman, headtube => 10.9cm high (actual decal), 10cm high (graphic), wide varies

 

[Elev12k]

Above where the measurements the below style decals:

Hope this helps. Good luck.

 

[hairstream]

I'm sorry. What was that? I got distracted by the Miyatas!! :shock:

... seriously, this will help immensely. Many thanks.

anymore pics of the blue Miyata?

 

[Elev12k]

Hairstream,

The blue fork belongs to this frame:

1991 Miyata Team. Bike in the background is a 1993 Koga TiRunner btw.

The orange frame where the Yeti is leaning to is a 1980 Koga GentsLuxe-S. A full Dura Ace race-touring orientated bicycle. The frame is pretty much similar to the US Miyata 912.

I have a dozen or so more Miyatas. If you wanna see particular models, just ask.

 

[hairstream]

I had a funny feeling. Ooh La La!!

 

[Crell]

I have a pic with the exact - well exact as my shaky hands and calipers - measurements. It's on another laptop. Ill post it later. If I forget, just PM me a reminder

That Hball Miyata is stunning.

 

[JustKev]

I have a jpg of the yeti stencil type downtube and seatstay decals from Gil. He needs help sizing them (I have freshly powdered frames) and can't get the sizing for him. Can somebody with FRO/Pro Fro please measure the "print" part of the decals from top to bottom and left to right to help him size the actual decals he is doing for me? Thanks.... kev?

I think Gil's images are those I supplied him with and were scanned 'actual size'

Elev12k's measurements concur with my frame.

 

[hairstream]

Gil's measurements are (lettering)...

Downtube... 57 x 35mm
Seatstays... 98 x 28mm

Based on the feedback, I will go with that size? He just wanted me to check that they would be appropriate for my 19 inch FRO. I have no originals to check, so am hoping they should suffice.

He is also looking for proper dimensions for ATAC stem decal as they are in the pipeline.

Cheers.