Unfortunately, due to lack of space I'm having to split one of my bikes. Therefore I have the following parts available.
XTR hubs laced to Mavic 717 Disc rims via good quality spokes with XTR quick release skewers included. Also includes cassette and centre lock XTR discs.
XTR combined shifter/brake levers. They are the type that uses the up/down click of the levers to change gear, takes a bit of getting used to but works well. I also have little paddles that bolt on to the bottom to allow finger shifts.
XTR rapid rise rear mech, again takes a bit of getting used to but works well in practice.
XTR front mech, 34.9 clamp, top pull. Pivots are a bit sticky from sitting but I'm sure will strip/lubricate ok.
XTR brake calipers. Front caliper is included but not fitted. Fitted is a newer type Shimano caliper to allow me to use a post mount caliper suspension fork.
XTR triple chainring cranks with included bottom bracket.
Goodridge braided hose kit, unused.
All are used parts, do have some marks from normal use and will need a good scrub but are in good condition and with the XTR jewel like quality of the time should clean up and work nicely for a long time to come.
I would prefer to sell as a job lot, it would be ideal for someone building up a frame. I'm based near Inverness, Scotland so happy to either allow collection or post at cost.
I'm not sure about pricing so happy to take advice/suggestions. At the moment I'm going to suggest £150, comments and PM's are welcome!
XTR hubs laced to Mavic 717 Disc rims via good quality spokes with XTR quick release skewers included. Also includes cassette and centre lock XTR discs.
XTR combined shifter/brake levers. They are the type that uses the up/down click of the levers to change gear, takes a bit of getting used to but works well. I also have little paddles that bolt on to the bottom to allow finger shifts.
XTR rapid rise rear mech, again takes a bit of getting used to but works well in practice.
XTR front mech, 34.9 clamp, top pull. Pivots are a bit sticky from sitting but I'm sure will strip/lubricate ok.
XTR brake calipers. Front caliper is included but not fitted. Fitted is a newer type Shimano caliper to allow me to use a post mount caliper suspension fork.
XTR triple chainring cranks with included bottom bracket.
Goodridge braided hose kit, unused.
All are used parts, do have some marks from normal use and will need a good scrub but are in good condition and with the XTR jewel like quality of the time should clean up and work nicely for a long time to come.
I would prefer to sell as a job lot, it would be ideal for someone building up a frame. I'm based near Inverness, Scotland so happy to either allow collection or post at cost.
I'm not sure about pricing so happy to take advice/suggestions. At the moment I'm going to suggest £150, comments and PM's are welcome!
