TreaderSteve":39llxu12 said:Looking at the schematic looks like 715 200 - to me, probably a regular chromed steel washer with the tab, or, should I say a regular tabbed washer would do the trick. If the original was Ti fair enough but a steel one would 'do'. As would (probably) any half-decent 1 1/8 caged set of bearings (3/16"x20).
https://si.shimano.com/pdfs/ev/EV-HP-M9 ... 2-1194.pdf
Buy the bits then bill your LBS...before never using them again!