dazzawazza
Senior Retro Guru
- Feedback
- View
XTR M900 Chainset that has had heavy use.
There are nicks and scrapes and shoe rub.
I have tested the extractor and pedal threads and they are ok.
The square tapers are in good condition except for small damage to the square taper on the outside of the drive crank (see picture 6). I think this was caused by using an extractor that's slightly too big. The inside taper, which has the surface area contact, is fine.
The chainrings have heavy wear and may need replacing. Please make your own judgement from the photos.
£30 incl UK postage. I will post outside UK but the price will require adjustment.
Please answer this thread before sending a PM.
Thanks
There are nicks and scrapes and shoe rub.
I have tested the extractor and pedal threads and they are ok.
The square tapers are in good condition except for small damage to the square taper on the outside of the drive crank (see picture 6). I think this was caused by using an extractor that's slightly too big. The inside taper, which has the surface area contact, is fine.
The chainrings have heavy wear and may need replacing. Please make your own judgement from the photos.
£30 incl UK postage. I will post outside UK but the price will require adjustment.
Please answer this thread before sending a PM.
Thanks
