Peterpoddy
Retrobike Rider
I came into a nice bag of retro odds and sods recently, and although I’m keeping the XT thumbies and XT rear hub 
the rest is no use to me but it’s good kit and needs to be used
Pics here - http://www.flickr.com/photos/peter_atki ... 689194731/
These pics make the stuff look slightly worse than it really is IMO.
If you’re not happy with any item, I’ll refund in full upon return (You pay return post though)
Can’t say fairer than that really!
Please email me at peterpoddy AT gmail DOT com with any questions as I might not be able to check this thread too often
Suntour XC Pro Greaseguard Hubs x 2
One has a cassette (11-24) and the correct Suntour QR. This is the best of the two. The bearings are buttery smooth with zero play. The freehub ticks crisply and runs smoothly. The cassette looks hardly worn. It’s a lovely hub, basically.
£30 posted
The second one is fine but the bearings are a bit rough. It would probably benefit from a strip and new bearings, but I’ve not opened it up to look. It’s not too bad as it is, I’ve certainly used a LOT worse many times! Freehub is fine, just as good as the other one
£17 posted
Or the pair for £42
-------------------------------------
Deore XT cantis
Full set of 4 cantis, they look lovely and shiny, all the springs and backing plates are present, pads are later v-brake XT pads.
Bad points - 2 of the 4 plastic trim washers that sit behind the bolt heads are cracked and there’s only 2 mounting bollts. Nothing bad really, just niggly, but I like to be honest
£22 SOLD
-------------------------------------
Suntour Brake Levers
Plain black Suntour levers, which look very similar to the XC LTD ones I had on my ’91 Cinder Cone, but there’s no code numbers or anything on them that I can see. These will be canti, not vee, brake levers. Decent used condition.
£10 posted
-------------------------------------
Dia Compe SS7 levers
Nice nick, few scuffs on the clamps. THE classic lightweight brake lever!
£19 posted
the rest is no use to me but it’s good kit and needs to be usedPics here - http://www.flickr.com/photos/peter_atki ... 689194731/
These pics make the stuff look slightly worse than it really is IMO.
If you’re not happy with any item, I’ll refund in full upon return (You pay return post though)
Can’t say fairer than that really!
Please email me at peterpoddy AT gmail DOT com with any questions as I might not be able to check this thread too often
Suntour XC Pro Greaseguard Hubs x 2
One has a cassette (11-24) and the correct Suntour QR. This is the best of the two. The bearings are buttery smooth with zero play. The freehub ticks crisply and runs smoothly. The cassette looks hardly worn. It’s a lovely hub, basically.
£30 posted
The second one is fine but the bearings are a bit rough. It would probably benefit from a strip and new bearings, but I’ve not opened it up to look. It’s not too bad as it is, I’ve certainly used a LOT worse many times! Freehub is fine, just as good as the other one
£17 posted
Or the pair for £42
-------------------------------------
Deore XT cantis
Full set of 4 cantis, they look lovely and shiny, all the springs and backing plates are present, pads are later v-brake XT pads.
Bad points - 2 of the 4 plastic trim washers that sit behind the bolt heads are cracked and there’s only 2 mounting bollts. Nothing bad really, just niggly, but I like to be honest
£22 SOLD
-------------------------------------
Suntour Brake Levers
Plain black Suntour levers, which look very similar to the XC LTD ones I had on my ’91 Cinder Cone, but there’s no code numbers or anything on them that I can see. These will be canti, not vee, brake levers. Decent used condition.
£10 posted
-------------------------------------
Dia Compe SS7 levers
Nice nick, few scuffs on the clamps. THE classic lightweight brake lever!
£19 posted
