Bought a while ago now and I really wanted to use them on my DBR build as they would have looked the part, but weight over looks (and probably function) won out and I went for some RS FSX instead (air sprung too). The result is, that whilst I would love to hang on to these, they will just gather dust so up for grabs they go.
Lovely condition, a couple of slight imperfections on one leg, but barely visible/feelable (if there is such a word) and certainly don't affect function.
The stantions are completely unmarked, and I have taken them out of the legs and there are no marks anywhere at all, even on the inside around the bushings.
The black crown, stantions etc look great against the almost ti colourd lowers, which is why I thought they would work so well with my Ti project, but as I was looking to go light on the build, the looks weren't quite enough.
Functionally they work well, damping cartridge is fine, preload adjusters work fine too. There is a small 'drop' of about 3mm before the fork engages - I doubt this would be noticable once fitted and under load, but it can be felt when off a bike (not that I have had them on one).
Last but not least, 1 1/8 steerer and it is about 193mm long.
Cost me £40 plus postage if I recall correctly, so lets say £45 via courier within the UK.
Manual, parts and even servicing still available for these forks as I contacted these guys to confirm:
http://www.mountainracingproducts.com
Lovely condition, a couple of slight imperfections on one leg, but barely visible/feelable (if there is such a word) and certainly don't affect function.
The stantions are completely unmarked, and I have taken them out of the legs and there are no marks anywhere at all, even on the inside around the bushings.
The black crown, stantions etc look great against the almost ti colourd lowers, which is why I thought they would work so well with my Ti project, but as I was looking to go light on the build, the looks weren't quite enough.
Functionally they work well, damping cartridge is fine, preload adjusters work fine too. There is a small 'drop' of about 3mm before the fork engages - I doubt this would be noticable once fitted and under load, but it can be felt when off a bike (not that I have had them on one).
Last but not least, 1 1/8 steerer and it is about 193mm long.
Cost me £40 plus postage if I recall correctly, so lets say £45 via courier within the UK.
Manual, parts and even servicing still available for these forks as I contacted these guys to confirm:
http://www.mountainracingproducts.com
