wanted 1 inch threaded or ahead fork

[hurin76]

i need a 1 inch threaded fork for my 1998 fondriest frame, needs to be something that will work with the frame, carbon or alloy..maybe chromed steel would be ok..

will consider ahead, but would really prefer threaded as i wish to use up a campag headset and 3ttt quill stem. the steerer tube is 15cm long. I will need approximately 1.2cm of thread. so in short i dunno what length i will need..must be around 18cm..

 

[pigman]

the general rule for a standard threaded headset was headtube length plus 4 cm. Threadless will obviously need more but depends on the spacers and stem you have

 

[SteveW]

I have a Sakae aluminium fork from about the same era (taken off a Merlin Titanium frame when I fitted a carbon fork). It's threaded and the crown top to steerer top measurement is 178mm. It looks a bit scruffy but should clean up nicely. £20 posted.

 

[SteveW]

I also have a Mizuno 1in Ahead carbon fork... 230mm steerer length. £40 posted

 

[bikenut2010]

i need a 1 inch threaded fork for my 1998 fondriest frame, needs to be something that will work with the frame, carbon or alloy..maybe chromed steel would be ok..

will consider ahead, but would really prefer threaded as i wish to use up a campag headset and 3ttt quill stem. the steerer tube is 15cm long. I will need approximately 1.2cm of thread. so in short i dunno what length i will need..must be around 18cm..

I have this NOS alu racing fork...

about £100 new, so £50 posted?

 

[hurin76]

thats a nice selection let me have a think and get back to you guys..

 

[bikenut2010]

Alu fork

thats a nice selection let me have a think and get back to you guys..

PS it's new and never fitted

 

[hurin76]

I really want a threaded fork. my steerer and headset stack height amounts to 18.5cm total, so thats what i'm looking for, if anyone has anything?