Various parts - inc Shimano, Syncros, Ringle, Umma Gumma...

jonboy

Retro Guru
Feedback
View
Having a bit of a tidy up and thought i'd see if any of the following old parts might be of interest to someone...

2 x 1.8 Kevlar Specialized Pro Control S Umma Gumma tyres, Grey with amber side walls. Both used one poor condition, the other not too bad. Haven't tried to clean side walls, but doubt they clean up too well. £15 for the pair. SOLD

Ringle bottle cage (blue), worn anodising, a bit battered so not perfectly round, all the fittings missing. £5 SOLD

Ringle steel seat quick release, thread cut down, heavily scratched nut. £5 SOLD

Bulleye jockey wheels, blue, no spacing washers. £3 SOLD, pending payment.

Nuke Proof carbon front hub, 32h, reasonably smooth running, but well used. Spoke flanges might be a little work hardened. Wouldn't recommend for anything other than light use. £15

XT cartridge brake shoe set for cantilevers, new. £8 SOLD

XT 8spd STI shifter/levers, only light use, mechanisms good, but l/h shifter is missing gear indicator mechanism. Non V brake. £10 SOLD

XTR M900 12-28 cassette. Should be 8 spd but missing the 13t sprocket so only 7spd. Exactly the same ratio as 7spd 12-28 cassette. Perfect for a good looking light weight 7spd set up. Medium wear. £5 SOLD

Syncros stem, 1 1/8 quil, 130mm, 10 degree rise. really needs a re-spray, clamp is a little stretched and there is some cable wear on the underneath of the clamp. £3 SOLD

Syncros 26.8 x 330mm seatpost, is very slightly bent 155mm down - maybe good for spare clamp parts? £3 SOLD

2 x Mavic 230 rims. 32h. not perfect but would build usable wheels. £5

Venhill titanium rear mech bolt - for the wider shimano mech body. £2 SOLD, pending payment

Zero titanium axle bottom bracket, 68mm shell - 125mm axle, & fitting tool. Axle too twisted to use, but bearings good - maybe useful for spare cups, bearings or body? £5

7spd Shimano Altus STI units, hardly used. £5

Specialised r/h crank, 175mm - postage only

Offers maybe accepted. PM if interested. Paypal preferred. All prices exclude postage.

Pics to follow in a minute when I work out how to include them... :oops:

main.php


[http://www.retrobike.co.uk/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=80664[/img]

main.php


main.php


main.php


main.php


Jon
 
XTR M900 12-28 cassette. Should be 8 spd but missing the 13t sprocket so only 7spd. Exactly the same ratio as 7spd 12-28 cassette. Perfect for a good looking light weight 7spd set up. Medium wear. £5

interested in the above cassette and ringle cage pending pic
 
Just to clarify is that 4 brake pads?
Whats the postage?

XT cartridge brake shoe set for cantilevers, new. £8


.
 
Dude, I'll take this: Syncros 26.8 x 330mm seatpost, is very slightly bent 155mm down - maybe good for spare clamp parts? £3

Incoming PM.
 
For the good of transparency, also expressing an interest in:

jonboy":2r58m92t said:
Ringle steel seat quick release, thread cut down, heavily scratched nut. £5

XT 8spd STI shifter/levers, only light use, mechanisms good, but l/h shifter is missing gear indicator mechanism. Non V brake. £10

Syncros stem, 1 1/8 quil, 130mm, 10 degree rise. really needs a re-spray, clamp is a little stretched and there is some cable wear on the underneath of the clamp. £3
 
Back
Top