Updated: Some almost free stuff/tat

finbar

Retro Guru
Really need to get rid of this lot so please make me an offer on anything if you think its overpriced, but most of these prices are barely going to cover post & a jiffy bag!

Ritchey Vector Plus Rail saddle. Picture shows worst side - other one doesn't have any rips/holes. £3 posted.

3629582081_8caf090d5e.jpg


Alivio canti levers. I really like the shape of these. £3.50 posted.

3630396762_51bf04cac8.jpg


Onza L bend barends. Very scratched and missing end caps. £3.50 posted.

3629583087_7c9fd90f07.jpg


Shimano Acera X cantilevers. Pads almost new. £3.50 posted ***SOLD PENDING PAYMENT***.

3630397886_c664c5658f.jpg


Seapost QR. £1.50 posted ***SOLD PENDING PAYMENT***.

3630397648_b4fa970128.jpg


Dura Ace 7700 hoods. New (toolbox dirty though), i needed 7700c ones but stupid bike shop sent me the wrong sort - thanks Parker International. Even more stupidly i cut off one of the plastic knobs inside (you can clearly see on the picture) thinking it might make them fit. It didn't. There's so many other moldings i'm sure they'd still fit the correct STIs just fine though. £3 posted.

3590606562_cb70c25ba6_o.jpg


Shimano UN72 bb. ITAL threaded. Smooth. £6 posted.

3598957996_686d74e482_o.jpg


Kalloy basic 26.2mm seatpost. Almost 400mm long. £4 posted.

3630396526_30851e6a7d.jpg


Pearl Izumi Ultrasensor jersey. Only worn/washed two or three times as its just too big for me. Labelled as a small but i think it fits as a medium (or maybe i just like tight roadie clothes ). Measures around 19.5" armpit to armpit and 24" shoulder to hem. £8.50 posted.

3589807927_a478e68d00.jpg


Acera rear mech. Unused but jockey wheels gone. Free (postage will be £2 or so i guess).

3630397116_3d5e77f3a6_o.jpg


More pics of most things here. Please make me an offer if you think something is overpriced.

175 mm arms. Tatty paint but otherwise fine. Rings are 24-34-46, they've been used but have life left. ISIS. BCD = 110 mm. I can include a Truvativ Giga Pipe Team SL bb if you like, but its started creaking :roll: ***SOLD***

X-Lite "cross country specific" riser bars. 24" wide, black, bit of a scuff on one of the bends but otherwise fine. ***SOLD***

DMR V12. Right Hand pedal only! Spins fine. ***SOLD***

USE Alien seatpost 27.2 mm. Cut down to 275mm length, crazy light. Rather scuffed at the bottom and the cradle bolts are a bit shagged (they still work, just). Replacements can be had cheap from CRC or USE. ***SOLD***

Generic ahead stem from a Giant XTC. For regular bars, 90mm * 10 degree rise. ***SOLD***

Shimano M505 spds. Bit tatty, work fine. ***SOLD*** (can include a couple of pairs of used but working cleats if you want).

Tektro BMX brake levers. Bought for an aborted fixed gear project. ***SOLD***

RaceFace "Good n' Evil" grips. Barely used. ***SOLD***

Stupidly narrow riser bars. One for you fixie fans! Marin Ovation risers, standard clamp, vut down to 19". ***SOLD***

Tatty old Dia Compe canti levers. Free with any of the above. ***GONE***

Mismatched pair of Avid v brake levers. One is Speed Dial 7, the other is a newer model that is the same both sides up (so can be run on the L or R side). ***SOLD***

Shimano Deore XT HB-M737 Parallax front hub. 32 hole. I should have given it a clean before i took the pictures, condition is not as bad as it looks. Bearings feel nice. The decal is lifting a little bit, i'm sure you could stick it back down if you wished.. ***SOLD***

XT v brakes - BR M750. Springs are a bit corroded on one pair but funcitonally fine and grub screws still turn. ***SOLD***

Avid Arch Rival 40 v brakes. No pads. ***SOLD***

LX cantis. Nice cartridge pad holders (pads need replacing mind). ***SOLD***

Chainstay protector. Bit knackered, still does its job. Free.***GONE***

GT 1" cromo stem. Orange splatter paint, from an Outpost Trail i think. Length is 115mm i think. ***SOLD***

XTR M952 cranks (9spd). Rings are 24, 34, 46 - some of the plating is tatty but they're not too badly worn. Will include a road octalink bb which is low rent but spins fine. £42 posted. See flickr link at bottom of ad for loads more pics. ***SOLD***
 
yo

interested in a few items, but have some questions
crankset, is that CD or ATB..? (looks atb :? )
alien post, diameter?
 
Oops! Alien post is 27.2mm. I'll have to check the crankset BCD tonight i'm afraid, don't know off the top of my head.
 
sweet.. dibs on the generic stem and use post for now then.. would also really be great if the crank and rings were compact drive :) have a nice one
 
Back
Top