Hi
Bought on here earlier in the year, having built it up and had trouble with the gears jumping, Im pretty sure the rear mech hanger is slightly out of alignment (I replaced the mech pivot bolt with a new one so have eliminated that) so anyone with the alignment gauge tool would be able to sort this out. Or it would be fine as it is for running as a single speed.
I had a new cheap silver headset fitted (needle roller lower bearing) , a new proper seat bolt clamp, new steel stem. Seatpost & handlebar are original. The condition is used - plenty of marks but no dents. The chainstay bridge has quite a lot of corrosion on it.
18" Seat tube c-t
22 & 1/4" Top tube c-c
1" ahead headset/fork
26.0mm seatpost 350mm long
585mm handlebar
120mm stem
Tope tube cable routing (28.6 front mech size)
Bi-ovalised down tube
£35 UK Posted
Bought on here earlier in the year, having built it up and had trouble with the gears jumping, Im pretty sure the rear mech hanger is slightly out of alignment (I replaced the mech pivot bolt with a new one so have eliminated that) so anyone with the alignment gauge tool would be able to sort this out. Or it would be fine as it is for running as a single speed.
I had a new cheap silver headset fitted (needle roller lower bearing) , a new proper seat bolt clamp, new steel stem. Seatpost & handlebar are original. The condition is used - plenty of marks but no dents. The chainstay bridge has quite a lot of corrosion on it.
18" Seat tube c-t
22 & 1/4" Top tube c-c
1" ahead headset/fork
26.0mm seatpost 350mm long
585mm handlebar
120mm stem
Tope tube cable routing (28.6 front mech size)
Bi-ovalised down tube
£35 UK Posted
