Wold Ranger
Old School Grand Master
- Feedback
- View
Loads on here I want to thin out, from my stash.
OPEN TO FAIR SWAPS,[/ PM me with interest please
Net forged 3D Syncros 94 bcd cranks, which are very minty, now selling as bare cranks £100 posted
Mint Electric blue Fred Salmon cnc'd bars £23
I also have a nice Ringle 3DV 145mm one inch quill stem and matching NOS Odyssey headset, £45 for each of them (much less than I paid)
TNT Titanium seatpost 365mmx 27.2 £120 posted to UK (On Hold)
Two 3 DV seat clamps, pretty Mint Salsa £12 no name £10 both 31.8 pics in centre bottom, Ti bolt not included.
XTR front mech, a 28.6mm band M901 Top pull, bottom swing
Nokian Semi slick white wall tyres, proper roadie touring version in 26, very tough retro Skinwall £25 posted
More to come soon
THINGS I NEED
Hope Ti-Glide Black or Siver wheelset
USE handlebars, purple if poss.
Ritchey Cranks
28.6 top pull front mech M732 would be nice etc.
3DV skewers USE or Hope.
PM me after expressing interest on here please, to save any confusion
SOLD Below
Rare (I've never seen another) HandBuilt 100 % in Britain from Reynolds 853 (frame) and 725 (Fork) Pashley special edition Trials/Trail frame, finished in Titanium two tone Paint. No major scuffs/dents/scrapes (It's never been trialled)
Slightely larger than the 26Mhz, can be ridden with a long seat post as shown, The frame looks small, but BB height is 13.5 inches and top tube is long, geometry gives impression of a small frame, but it's not
Frame weighes a tad over 4 pounds, massive tyre clearances, 853 tubing, which is rated as the best tubing you can buy for Cycle frames and vastly superior to even Titanium, with the highest fatigue strength available.
Sale is for Frame, Matching fork, headset, seat clamp and Ritchey 420mm seat post. I may throw a few other sweetners in too for genuine interest: £225 posted SOLD[/b] Subject the usual
This is a true do it all retro British frame.
31.8mm band M953, both are top pull bottom swing. £25 each.
Nice set of Pace MXCD 35 forks, various steerer options, including a rare one inch one, Elastomers could do with a few more in, very nice clean condition £75 posted
First up is a stunning 97/98 Rocky Blizzard frame and matching Tange forks. Not a mark on either, check out the detailed photo's, original paitn which is as near to factory fresh as you can get.
Size is 17.5 or Medium similar to an 18 Kona, can give meaurements to interested parties.
It comes as a package of F&F matching headset and seat clamp £175 posted
(May have a few more parts if needed. This is a really light and stable handling, fast bike, rides only like a Rocky can.)
Minty 27.2 Syncros Post and good 115mm Cattle prod stem (not Hinged, pictured with Deep Blue cnc'd METAL top cap and stainless taper head bolt). £85 posted.
Nice gloss back straight bladed forks 190 steerer off memory 1-1/8th 43 atc, not light but not too heavy £35 pis on Blizzard at the bottom.
OPEN TO FAIR SWAPS,[/ PM me with interest please
Net forged 3D Syncros 94 bcd cranks, which are very minty, now selling as bare cranks £100 posted
Mint Electric blue Fred Salmon cnc'd bars £23
I also have a nice Ringle 3DV 145mm one inch quill stem and matching NOS Odyssey headset, £45 for each of them (much less than I paid)
TNT Titanium seatpost 365mmx 27.2 £120 posted to UK (On Hold)
Two 3 DV seat clamps, pretty Mint Salsa £12 no name £10 both 31.8 pics in centre bottom, Ti bolt not included.
XTR front mech, a 28.6mm band M901 Top pull, bottom swing
Nokian Semi slick white wall tyres, proper roadie touring version in 26, very tough retro Skinwall £25 posted
More to come soon
THINGS I NEED
Hope Ti-Glide Black or Siver wheelset
USE handlebars, purple if poss.
Ritchey Cranks
28.6 top pull front mech M732 would be nice etc.
3DV skewers USE or Hope.
PM me after expressing interest on here please, to save any confusion
SOLD Below
Rare (I've never seen another) HandBuilt 100 % in Britain from Reynolds 853 (frame) and 725 (Fork) Pashley special edition Trials/Trail frame, finished in Titanium two tone Paint. No major scuffs/dents/scrapes (It's never been trialled)
Slightely larger than the 26Mhz, can be ridden with a long seat post as shown, The frame looks small, but BB height is 13.5 inches and top tube is long, geometry gives impression of a small frame, but it's not
Frame weighes a tad over 4 pounds, massive tyre clearances, 853 tubing, which is rated as the best tubing you can buy for Cycle frames and vastly superior to even Titanium, with the highest fatigue strength available.
Sale is for Frame, Matching fork, headset, seat clamp and Ritchey 420mm seat post. I may throw a few other sweetners in too for genuine interest: £225 posted SOLD[/b] Subject the usual
This is a true do it all retro British frame.
31.8mm band M953, both are top pull bottom swing. £25 each.
Nice set of Pace MXCD 35 forks, various steerer options, including a rare one inch one, Elastomers could do with a few more in, very nice clean condition £75 posted
First up is a stunning 97/98 Rocky Blizzard frame and matching Tange forks. Not a mark on either, check out the detailed photo's, original paitn which is as near to factory fresh as you can get.
Size is 17.5 or Medium similar to an 18 Kona, can give meaurements to interested parties.
It comes as a package of F&F matching headset and seat clamp £175 posted
(May have a few more parts if needed. This is a really light and stable handling, fast bike, rides only like a Rocky can.)
Minty 27.2 Syncros Post and good 115mm Cattle prod stem (not Hinged, pictured with Deep Blue cnc'd METAL top cap and stainless taper head bolt). £85 posted.
Nice gloss back straight bladed forks 190 steerer off memory 1-1/8th 43 atc, not light but not too heavy £35 pis on Blizzard at the bottom.
