therealkw15
MacRetro Rider
- Feedback
- View
Let me offer this lovely stuff up for grabs. Prices include postage to UK only. Reduction for anyone collecting from Kirkwall, Orkney, may deliver as far as Stromness 
Click on the pictures to see them bigger.
First up a set of M350 Exage Trail levers and cantis, from a 1989 Saracen Tufftrax. VGC as I went down the V route early. Complete with hoods, adjusters and straddle wires, although the brake blocks are past it. £13
exagetrail by therealkw15, on Flickr
Next, an SR Suntour PFF chainset, 42/32/22 riveted rings, 170mm arms for square taper BB. I'd say it has done about 20 miles tops. Suitable for 7/8/9 speed. £17.50
chainset by therealkw15, on Flickr
An ITM quill stem from a 1990 Saracen Tufftrax, 120mm reach, with cable stop and roller. 22.1mm diameter for 1" headset. £6
ITM1 by therealkw15, on Flickr
ITM2 by therealkw15, on Flickr
A Girvin Flexstem, green elastomer, stem painted black. Top cap present, 80mm from centre of handlebar clamp to pivot. 25.2mm diameter for 1 1/8" headset. £17 posted
flexstem1 by therealkw15, on Flickr
flexstem2 by therealkw15, on Flickr
A set of Project 2s, SPINNER branded on steerer and dropouts, 28.6 mm diameter for 1 1/8" Aheadset, 180 mm long steerer. No disc tab. Seems to be slightly suspension corrected - 410mm from axle to crown, 375mm clear space from axle to where tyre would scrape the fork. £27. NOW SOLD
P2-1 by therealkw15, on Flickr
p2-2 by therealkw15, on Flickr
Click on the pictures to see them bigger.
First up a set of M350 Exage Trail levers and cantis, from a 1989 Saracen Tufftrax. VGC as I went down the V route early. Complete with hoods, adjusters and straddle wires, although the brake blocks are past it. £13
exagetrail by therealkw15, on Flickr
Next, an SR Suntour PFF chainset, 42/32/22 riveted rings, 170mm arms for square taper BB. I'd say it has done about 20 miles tops. Suitable for 7/8/9 speed. £17.50
chainset by therealkw15, on Flickr
An ITM quill stem from a 1990 Saracen Tufftrax, 120mm reach, with cable stop and roller. 22.1mm diameter for 1" headset. £6
ITM1 by therealkw15, on Flickr
ITM2 by therealkw15, on Flickr
A Girvin Flexstem, green elastomer, stem painted black. Top cap present, 80mm from centre of handlebar clamp to pivot. 25.2mm diameter for 1 1/8" headset. £17 posted
flexstem1 by therealkw15, on Flickr
flexstem2 by therealkw15, on Flickr
A set of Project 2s, SPINNER branded on steerer and dropouts, 28.6 mm diameter for 1 1/8" Aheadset, 180 mm long steerer. No disc tab. Seems to be slightly suspension corrected - 410mm from axle to crown, 375mm clear space from axle to where tyre would scrape the fork. £27. NOW SOLD
P2-1 by therealkw15, on Flickr
p2-2 by therealkw15, on Flickr
