sylvain
BoTM Winner
SOLD
More photos, here: http://www.flickr.com/photos/patronchou ... 737203119/
the carbon is all fine. no play and turn freely, freewheel ok with some dents from cassette.
front is alloy rim with a fair bit of a groove from wear - but not too bad. put it in forks and true to less then 1mm sideways. to those wondering, the bit of black tape was there to hold a computer magnet, I just haven't removed it yet.
rear is ceramic rim with a fair few chips which i took photos of. put it in frame and measured out of trueness to 1.5mm amplitude sideways. i remember running them with v-brakes and it was ok but required attention to get the setting right side to side to prevent rubbing. i reckon with cantis and more pad clearance it would be fine as these typically have at least 4mm on each side.
would want £150 + postage, Uk only for these.
More photos, here: http://www.flickr.com/photos/patronchou ... 737203119/
the carbon is all fine. no play and turn freely, freewheel ok with some dents from cassette.
front is alloy rim with a fair bit of a groove from wear - but not too bad. put it in forks and true to less then 1mm sideways. to those wondering, the bit of black tape was there to hold a computer magnet, I just haven't removed it yet.
rear is ceramic rim with a fair few chips which i took photos of. put it in frame and measured out of trueness to 1.5mm amplitude sideways. i remember running them with v-brakes and it was ok but required attention to get the setting right side to side to prevent rubbing. i reckon with cantis and more pad clearance it would be fine as these typically have at least 4mm on each side.
would want £150 + postage, Uk only for these.
....thaaaaat's..... RETROBIKE!!!
