Sold: Specialized s-works enduro M5

ishaw

Gold Trader
GT Fan
Feedback
View
Lovely m-5 alloy full suspension frame. No dents, dings, tyre rub, just a few cosmetic marks.

I bought this a couple of years ago with the intention of building it up and riding, but I have to be honest with myself and admit it is more bike than my riding needs.

I have given it a full strip down, replacing all the bearings (linkage, main pivots and horst link) as well as some of the bolts with original specialized ones, so it is in fantastic working shape as well as cosmetically.

It originally had a brain shock, but this had a stuck rebound dial. I replaced this with a new old stock fox septune. I'll include the brain shock too in case you want to get it serviced and return to stock (they seem to sell for a fair bit too it seems).

Also included is a brand new mech hanger, and the fender that zip ties to the rear end to protect the shock from tyre splatter (one of the 4 mounting clips is broken (on the fender) but not in a way to prevent it doing the job intended).

The new parts alone owe me more than £100 but it needs a new home where it will get the use intended.

After £175.

I also bought a new bolt kit from specialized at £40 (have receipt) if you want spares. Will include for £30.

Original seat qr included. I think I also have the original stem too.

Have plenty of parts to help build this up if you need anything. Ranging from drive train, finishing kit and forks.
 

Attachments

  • PSX_20210131_235959.jpg
    PSX_20210131_235959.jpg
    59.8 KB · Views: 1,045
  • PSX_20210201_000025.jpg
    PSX_20210201_000025.jpg
    57.4 KB · Views: 1,044
  • PSX_20210201_000042.jpg
    PSX_20210201_000042.jpg
    40 KB · Views: 1,042
  • PSX_20210201_000058.jpg
    PSX_20210201_000058.jpg
    39.6 KB · Views: 1,041
  • PSX_20210201_000120.jpg
    PSX_20210201_000120.jpg
    45.2 KB · Views: 1,040
  • PSX_20210201_000142.jpg
    PSX_20210201_000142.jpg
    40.7 KB · Views: 1,043
Re:

Year is around 2006.

Frame size, will measure shortly.

Wheel size: 26er

Forks. I have a couple of sets of pace rc41s which are about right travel wise (oe were fox talas). Also have a set of rs revs u-turn air but they need the u-turn looking at as it leaks air slowly. I have a brand new assembly, just not got around to fitting it yet. Also have a set of reba air u-turn in yellow that were fully serviced a while back and never been used since. Might have other forks but would need to confirm as not 100%. They would be around the 100-120mm travel mark if I do.
 
Back
Top