EDIT: SOLD
Hi guys,
I need to finance my new Adroit that is why my Attitude Storm is for sale.
The frame is model year 1993, i.e. 1 7/8" Downtube, 31.8 seatpost, debossed decals, "Mission Control" decalled MC1 unit. INHM the best Attitude model year.
No cracks, no dents.
Rare 0 degrees MC1 with 135mm.
It is original Storm; artist was Kory Dow. However, the Uniklein rigid fork is an (excellent) repaint by Jonrock. Jonrock had touched up the frame as well. This is want Jonrock wrote:
The majority of the painting is original and there is some corrosion.
Ive done a bit of a restoration on this Klein.
No cracks or dents.
"The rear stays were faded so I put more magenta over the chainstays then cleared.
Ive made a chip in the top tube better.
Ive painted some rigid forks to match.
Ive repaired the MC1 decals and recleared the MC1.
The bars are uncut but there is a bit of crimping at one end.
There is a couple of areas of bubbling on the rear stays pictured.
A little bubbling at the rear brake exit hole.
Also a small amount on the head tube."
viewtopic.php?t=141168&highlight=storm
Plenty of pics of the complete bike and Fuselage here:
http://fotos.mtb-news.de/s/65976
Please look at the pics closely. I have tried to picuture all the chips, bubbles, scratches and repaint areas.
This framset is not NOS and has the mentioned issues. A nice rider and a real "Storm".
Incl. original AntiChainSuck.
Incl. FD-M735, 34.9
Bottom bracket spindle (magnetic, so probably steel) is 125mm. For 45 EUR I can add a NOS 108mm (XTR 900) spindle and new high quality bearings. I am afraid I don't have the tools to swap the spindles.
Bar is 53cm wide and has ODI plugs.
The headset is rather rough but I had no problems riding.
Sorry, none of the parts you see are for sale. I will through in a FD-M735, 34.9. The parts are needed for my Adroit.
No dibbing; first who pays, get's it.
Payment paypal (gift or you pay the fees) or IBAN/BIC transaction.
1800 EUR + shipping or pickup in Berlin.
Thank you!
Hi guys,
I need to finance my new Adroit that is why my Attitude Storm is for sale.
The frame is model year 1993, i.e. 1 7/8" Downtube, 31.8 seatpost, debossed decals, "Mission Control" decalled MC1 unit. INHM the best Attitude model year.
No cracks, no dents.
Rare 0 degrees MC1 with 135mm.
It is original Storm; artist was Kory Dow. However, the Uniklein rigid fork is an (excellent) repaint by Jonrock. Jonrock had touched up the frame as well. This is want Jonrock wrote:
The majority of the painting is original and there is some corrosion.
Ive done a bit of a restoration on this Klein.
No cracks or dents.
"The rear stays were faded so I put more magenta over the chainstays then cleared.
Ive made a chip in the top tube better.
Ive painted some rigid forks to match.
Ive repaired the MC1 decals and recleared the MC1.
The bars are uncut but there is a bit of crimping at one end.
There is a couple of areas of bubbling on the rear stays pictured.
A little bubbling at the rear brake exit hole.
Also a small amount on the head tube."
viewtopic.php?t=141168&highlight=storm
Plenty of pics of the complete bike and Fuselage here:
http://fotos.mtb-news.de/s/65976
Please look at the pics closely. I have tried to picuture all the chips, bubbles, scratches and repaint areas.
This framset is not NOS and has the mentioned issues. A nice rider and a real "Storm".
Incl. original AntiChainSuck.
Incl. FD-M735, 34.9
Bottom bracket spindle (magnetic, so probably steel) is 125mm. For 45 EUR I can add a NOS 108mm (XTR 900) spindle and new high quality bearings. I am afraid I don't have the tools to swap the spindles.
Bar is 53cm wide and has ODI plugs.
The headset is rather rough but I had no problems riding.
Sorry, none of the parts you see are for sale. I will through in a FD-M735, 34.9. The parts are needed for my Adroit.
No dibbing; first who pays, get's it.
Payment paypal (gift or you pay the fees) or IBAN/BIC transaction.
1800 EUR + shipping or pickup in Berlin.
Thank you!
