Singlespeed chains

1 chain will be big enough for all combinations, unless you are running something stupid.

I.ve been mostly running a taya single speed again, 7 quid from halfords.

Don.t be tempted to buy a half link chain- they will stretch before they get a chance to wear
 
Awesome... thanks 8)

Would a BMX chain do d'ya think?

Could be a complete saddo and get a coloured one :oops:
 
A BMX chain is a singlespeed chain.

If you're near a branch of Clas Ohlsen, I see they are selling suitable chains for £1.99!
 
Cool (not about Clas Ohlson - I'm stupid miles away from one of those ;) )..

Thought that a BMX may be significantly shorter from BB to rear hub...
 
You don't really need a singlespeed specific chain...I presume you are converting. A good quality 8/9 chain is often better than a poor quality SS chain...and lighter to.
You just need to be sure which size you need....1/8th or 3/32nd..which is determined by your front ring (and maybe your tensioner)
 
Bmx chains are plenty long enough. I prefer to use them over the lighter 8 and 9 speed chains as i feel more secure in their strength when cranking up a steep hill.
 
what about the so called magic gear with no tensioner dont you need a half link chain for that? :?
 
mickyc":2z0gnj1k said:
what about the so called magic gear with no tensioner dont you need a half link chain for that? :?

Just use a normal chain (I recommend KMC 610 HX) with a half-link ( or link and a half).
The whole magic gear thing isn't really that successful though as once the chain wears a little you'll end up with too much slack.
 
Using the existing chain on the Outpost, I've just fitted a 36 front with 14 rear using a ghost gear.

Not sure what sort of ride this'll give but the tension is spot on.. this chain was too short to run a 36 front with 16 rear and kept falling off with a 36/13..

As long as it's not chucking it down tomorrow I'll take it for a spin...
 
Back
Top