Show me your Mavic MTB Groupo!

[Dr S]

How hard is that stuff to get? I'm stuck for a rear hub, front mech and shifters and i'm an impatient sod. Grass yourselves up and show me what you have so I can harrass you into selling

Si

 

[cchris2lou]

they were also doing some Paris dakar rims .

 

[legrandefromage]

expensive:

http://cgi.ebay.co.uk/Mavic-845-MTB-rea ... 720wt_1165

http://cgi.ebay.co.uk/Classic-80s-Mavic ... 594wt_1165

 

[cchris2lou]

the hubs are road version , not mtb .

and you can get them for less than 50 euros on french ebay .

the rear mech is very expensive indeed .

 

[gibbleking]

the jockies i had on my mavic had grey plastic ...hated them so i swapped them for red control techs ..looked lovely and built like a brick outhouse....nice to see another one ...havent seen mine since i sold my last sannie....wish i hadnt seen that lgf...now i miss it bad.....on a happier note i do have the shortcage version at the mo and im never going to flog that un

 

[greencat]

I used to have Mavic rear hub - and personally I'd stay well clear.

The axel snapped twice in the space of 8 months (once during a race) - 6 weeks waiting time for replacement each time.

I soon got shot of that wheelset after that I can tell you.

 

[stuey]

iirc the covers split off the wishbone thumbies PDQ too.

Still love the chainsets.

 

[dbmtb]

I've got a 36H rear Dakar hub with 130mm axle Dr S. But it's reserved for my Alan cross bike which is awaiting a matching 32H front hub.

HOWEVER.....

If you can dig up a pair of late 80s/early 90s 32H 501 or 531 road hubs,then I could be persuaded to part with it.

The NIP wishbone shifters you'll have to make me a VERY big offer before you could persuade me to part with them though.

 

[cchris2lou]

I've got a 36H rear Dakar hub with 130mm axle Dr S. But it's reserved for my Alan cross bike which is awaiting a matching 32H front hub.

HOWEVER.....

If you can dig up a pair of late 80s/early 90s 32H 501 or 531 road hubs,then I could be persuaded to part with it.

The NIP wishbone shifters you'll have to make me a VERY big offer before you could persuade me to part with them though.

how about 210 ?

http://cgi.ebay.fr/MOYEUX-MAVIC-510-LOT ... 286.c0.m14

 

[cchris2lou]

I've got a 36H rear Dakar hub with 130mm axle Dr S. But it's reserved for my Alan cross bike which is awaiting a matching 32H front hub.

HOWEVER.....

If you can dig up a pair of late 80s/early 90s 32H 501 or 531 road hubs,then I could be persuaded to part with it.

The NIP wishbone shifters you'll have to make me a VERY big offer before you could persuade me to part with them though.

how about 510 ?

http://cgi.ebay.fr/MOYEUX-MAVIC-510-LOT ... 286.c0.m14