Sold Shimano XT M732 Freehub - NOS

[Si_33]

First generation XT M732 freehub with HG fitment but also with UG compatibility. 32 holes and 130mm OLD. Still sealed in packaging and includes skewer and paperwork. The box is in good shape too.

£75 posted in the U.K. PP F&F please or buyer pays fees. Any questions, please ask.

 

[Once A Hero]

That's a nice piece to have and I'm sure someone must have a matching front to make a set
I note the box says bolt secured FH-M730, so presumably not the original box for that rear hub?

 

[Si_33]

Good question. It says’Frrehub’ on the top of the box... and ‘bolt secured freewheel’ - easier to see on the other side.. with a little image showing the hub/cassette/skewer:

 

[Antstark]

It means the freewheel mechanism is secured by a bolt, so you can replace it

 

[Tootyred]

Its the wrong box. Thats an XT rear hub m730 box.....the hub is an XTii M732. It says HB 730 on the box label. The hubs are actually slightly different casting being flatter at the non drive end.....they also had a different grease port, stamped m730.....and uniglide of course.

But oddly the right instructions!

Still a really nice hub.

 

[Tootyred]

Btw st john st cycles still sell complete 146mm axles for these, so you could very readily convert it to 135mm if needed.

 

[Si_33]

Thanks for the input everyone. Perhaps using slightly older boxes with a newer product? To clarify, the hub is stamped M732.

 

[Antstark]

Btw st john st cycles still sell complete 146mm axles for these, so you could very readily convert it to 135mm if needed.

Yeah.. except the hub body on the 130 is narrower than the 135. It’s not just the axel length. Why they did that is beyond me.

 

[Tootyred]

Yes. 5mm narrower......hence spacers all the same, which makes for an easy swap.