Rockshox disk brake - rotor -hub

[retrobikeguy]

White industries / Rockshox 20mm (bolt thru) front hub with 3 bolt rotor , caliper and spare rear rotor.

would be great for a Retro GT downhill build with boxxers on

this was going on the trimble but have decided to stick with the canti's

£40 posted

 

[retrobikeguy]

Pic added

 

[marky mark]

WHAT SIZES ARE THE DISCS PLEASE??

AND DOES THE CALIPER WORK WITH BOTH SIZES?

CHEERS
MARK

 

[B3]

Lee, did you ever get a standard White Industries front disc hub?

 

[retrobikeguy]

Hiya B3,

No mate, kinda got used to using canti's ont trimble and stopped the search for the std front hub, have been a few on ebay.com but never remembered when the bloody auction finished - hence missed it :evil:

marky mark,

I will measure the discs tomoz for you, this caliper was for the front (smaller disk) - sure the rear caliper fitting attached to the rear hub somehow - (someone correct me if I'm wrong).

 

[B3]

The rear white industries rear hub had a floating mount that bolted to the drop out and used a torque arm to the brake post.

The Rock Shox's mount is ISO, and the disk will fit ISO hubs, using 3 bolts, so with some modifications, 4mm needs to be taken off the bracket, this will fit the back end of a bike with disc mounts.

They bolt straight on to Judy's with the right hub, Boxxers with this hub & some spacers and any AMP fork with a disc mount using the right caliper bracket & disc. The AMP stuff is still available from AMP.

 

[retrobikeguy]

The rear white industries rear hub had a floating mount that bolted to the drop out and used a torque arm to the brake post.

The Rock Shox's mount is ISO, and the disk will fit ISO hubs, using 3 bolts, so with some modifications, 4mm needs to be taken off the bracket, this will fit the back end of a bike with disc mounts.

They bolt straight on to Judy's with the right hub, Boxxers with this hub & some spacers and any AMP fork with a disc mount using the right caliper bracket & disc. The AMP stuff is still available from AMP.

The man knows his stuff

 

[retrobikeguy]

WHAT SIZES ARE THE DISCS PLEASE??

CHEERS
MARK

Hiya Mark

discs are front 184mm & rear 144mm, this hub works with the larger ring only, the rear is just a spare if you have a rear.

 

[retrobikeguy]

Bumpy bump

 

[Dhphat]

Is this still around? This would look tit on my Spooky w/ a single crown converted dho!!!