Have you ever done it - share your insight.
So what I have is a Mavic 520 rear hub which has a road qr-axle. I would like to take the qr-axle out and replace it with track axle which I have. I'm kinda stuck with the removing. The problem with the current axle is that it has several "bumbs" on it that I wasn't able to find on Mavic catalogues (comparing to these pics of axles). By bumbs I mean the things you can see in the pic below:
and other side:
It has three of those "bumbs". One you can see on pic and two on the other side. Should I just give it some angle grinder and some hammering to get the axle of or what?
Thanks for the help in advance!!
So what I have is a Mavic 520 rear hub which has a road qr-axle. I would like to take the qr-axle out and replace it with track axle which I have. I'm kinda stuck with the removing. The problem with the current axle is that it has several "bumbs" on it that I wasn't able to find on Mavic catalogues (comparing to these pics of axles). By bumbs I mean the things you can see in the pic below:
![9851973166_0d4a6b4b5b_z.jpg](/proxy.php?image=http%3A%2F%2Ffarm4.staticflickr.com%2F3676%2F9851973166_0d4a6b4b5b_z.jpg&hash=cfb61883f240f7b94490db0afa60e587)
and other side:
![9851927404_3d0638336c_z.jpg](/proxy.php?image=http%3A%2F%2Ffarm6.staticflickr.com%2F5326%2F9851927404_3d0638336c_z.jpg&hash=641b288dce0b8e6b42983325cd1de731)
It has three of those "bumbs". One you can see on pic and two on the other side. Should I just give it some angle grinder and some hammering to get the axle of or what?
Thanks for the help in advance!!