jez-4-bikes-max
Kona Fan
- Feedback
- View
How do these work - I cant see a stop on the rear for the hanger? Anyone have a better pic of Billy with cantis on back?
Rear cantis on Shockabilly?
- Thread starter jez-4-bikes-max
- Start date
B3
Senior Retro Guru
There should be a block on the seat stays, roughly in line with the seat tube on the drive side stay.
If it's not there, someones cut it off when they converted over to V's.
I ran my AMP on canti's when the first came out (the AMP that is) canti's, even with a booster were poor at best.
If it's not there, someones cut it off when they converted over to V's.
I ran my AMP on canti's when the first came out (the AMP that is) canti's, even with a booster were poor at best.
jez-4-bikes-max
Kona Fan
- Feedback
- View
Ah I got it - been peering at some pics - thought it was a gear cable stop - looks like the thing you mention. Thanks John.
Jez. you know I can't do the picture thing but John took a picture of mine and its in the gallery of the Nov '06 Cannock ride basically a stop is welded a bit above the gear cable stop on the drive side in line with the seat tube just out the picture but you will get the idea 
Max.
Max.
jez-4-bikes-max
Kona Fan
- Feedback
- View
A goody Max! Thank you!
