pro forx

[nafetsgurk]

any one knows, how to disassemble this fork.
i am almost ready, but how to get out the immersion tube out of
the stanchion tube.



i hope to get help here..........greetz

 

[nafetsgurk]

nobody knows...???

 

[misteroo]

Just a guess, but I dont they they were designed to be disassembled!!!!!

I think they may be at the "cheaper" end of the market!!

 

[Tizumo]

Don't know about disassembling that but found this:

http://forums.mtbr.com/showpost.php?p=3672727&postcount=8

 

[8690q]

If they can be removed it will probably be a long allen key down through the top cap on both legs.

Can the top caps be removed ?

 

[john]

they must come apart, surely?

If they can be removed it will probably be a long allen key down through the top cap on both legs.

Can the top caps be removed ?

That would be my first guess also.

 

[nafetsgurk]

this i have done already...
i removed the topcaps, inside i turned out the srews.
i removed also the bearings and the safety rings from
the stancion tubes.
but i cannot pull out the immersion out of the stancion tubes.
i will do this because i want to clean the fork and put a new elastomer
kit in the fork.
so i have to try + try + try i think..............

 

[ozpete]

If this is anything like the RST180 , trick to these is to remove the brace, then rotate the outer leg 90 degrees and pull down. But it sounds like you already have the legs apart and something wont come out from inside?

 

[dyna-ti]

i removed also the bearings

:shock: Bearings


It sounds quite tricky :? How about so pics so we can get a better idea?,a number of views etc.

 

[nafetsgurk]

so it looks now - i cannot get the inner tubes out of the stancion tubes.



the srews inside this tubes i already removed.



here i removed the safety rings (shown in the last pic )



last pic



uups...bearing - i meaned SEALING.......

is it possible that i have to remove the brake arms...???