Pace steerer swap shop!

[RAFbikes]

Hello chaps!

It's been a while but I back and looking for a 1" 160mm (total length) threaded steerer for a pace RC30 or RC35 I have in exchange either a:

1" 145mm threaded steerer
1" 249mm threadless steerer
1 1/8" 210mm threadless steerer
1 1/8" 203mm threadless steerer

All but the 210mm are missing that o ring at the bottom but they are easily replaced.

I also have 3 of the canti pivots of early pace suspension forks its te main pivots without springs etc and I also have an adaptor to fit a 1" steerer in an 1 1/8" crown.

 

[ishaw]

I may have a steerer that suits, I will check when I get home as I'm just leaving work. I'd be after the long thread less one if poss.

Do you have a pic of the canti rockers? I've the spring assembly but no rocker so if they are the right type, I'd take one of those too - for an rc35 with the CNC arch (not the mxc variety).

Cheers

 

[biocandy]

anyone in titanium..? :roll:

 

[ishaw]

anyone in titanium..? :roll:

I've a 1 1/8 in ti but needs the circlip groove adding.

 

[RAFbikes]

Thanks ishaw I look forward to it and the rockers are those 3 odd shaped bit's of metal in the picture.

Sorry biocandy there aren't any ti ones, they're all ali except the threaded one.

Staf.

 

[secret_squirrel]

anyone in titanium..? :roll:

I've a 1 1/8 in ti but needs the circlip groove adding.

For Biocandys benefit there is a dude on eBay.de that was flogging Ti steerers for around £40. Similar to iShaws they don't have the circlip thingy.

I have one on a set of RC30's believe several other retrobikers have them too.

 

[secret_squirrel]

anyone in titanium..? :roll:

I've a 1 1/8 in ti but needs the circlip groove adding.

For Biocandys benefit there is a dude on eBay.de that was flogging Ti steerers for around £40. Similar to iShaws they don't have the circlip thingy.

I have one on a set of RC30's believe several other retrobikers have them too.

 

[biocandy]

Yes seen his ti steerers, but aren't they all threaded? well.. can't seem to find his action now anyhow.. sorry shall not abuse your swap thread any more

good luck

 

[RAFbikes]

No worries it's a free for all!

 

[Moosey Moose]

210 threadless steerer

Hi,
Would you be interested in selling the 210mm 1 & 1/8th threadless steerer?If so could you drop me a pm please?
Ta
Rach