thefunkymunki
Senior Retro Guru
- Feedback
- View
Threaded 1 1/8 Judy XC, unwanted fork on a bike i bought - not used by me but need a service.
160mm from top of crown. 40mm of thread (off a 19in Kona)
The good bits:
Steerer, crown, legs all in decent condition as can be seen in the pic and would clean up very nicely.
Crown race included
Canti hanger included
The bad bits:
Elasomers need replacing
one of the red turny knob things at the top of the RH leg is missing
£20 posted
160mm from top of crown. 40mm of thread (off a 19in Kona)
The good bits:
Steerer, crown, legs all in decent condition as can be seen in the pic and would clean up very nicely.
Crown race included
Canti hanger included
The bad bits:
Elasomers need replacing
one of the red turny knob things at the top of the RH leg is missing
£20 posted