Wold Ranger
Old School Grand Master
- Feedback
- View
Couple of non Bike items looking to move on or swap for bike related gear? WHY?
First up a Hyper 21 powered 1/7th scale Nitro Powered Radio Controlled Stadium truck. This is full four wheel drive with all rc gear but needs a new pull starter(about £21 from most rc model shops) This was £500 plus new, but is not for back garden use or beginners as its too powerful and fast. comes with a Hummer shell, glo starter and Futaba multi chanel handset. I have clocked this beast at 73 mph on a runway, with a 0-60 time sub 6 seconds, so if you hit anything its going to do damage as it weighes over 9 kilos. It's very noisy and the Hyper 21 multi port engines will rev to over 25,000 rpm. Auto gear centrifugal box and central disc brake (engine braking is not enough!). It's currently part disassembled ready for rebuild. I also have quite a few spares/shox/suspension arms to go with it.
Looking for £100 plus post or collected? or swaps, must go to someone responsible though, as it could easily kill/maim someone if you hit them with it in a Park etc.
Second is a 15 inch Bar Mculloch two stroke chainsaw, nice condition with near new newish chain and non Kick back Stihl Bar, very light and easy starter, makes very quick work of even big logs if you know how to keep it sharp(I used to work in forestry) I have felled very big trees with this no problem. Looking for £85 plus post or collect or swaps.
Can deliver both a petrol cost
First up a Hyper 21 powered 1/7th scale Nitro Powered Radio Controlled Stadium truck. This is full four wheel drive with all rc gear but needs a new pull starter(about £21 from most rc model shops) This was £500 plus new, but is not for back garden use or beginners as its too powerful and fast. comes with a Hummer shell, glo starter and Futaba multi chanel handset. I have clocked this beast at 73 mph on a runway, with a 0-60 time sub 6 seconds, so if you hit anything its going to do damage as it weighes over 9 kilos. It's very noisy and the Hyper 21 multi port engines will rev to over 25,000 rpm. Auto gear centrifugal box and central disc brake (engine braking is not enough!). It's currently part disassembled ready for rebuild. I also have quite a few spares/shox/suspension arms to go with it.
Looking for £100 plus post or collected? or swaps, must go to someone responsible though, as it could easily kill/maim someone if you hit them with it in a Park etc.
Second is a 15 inch Bar Mculloch two stroke chainsaw, nice condition with near new newish chain and non Kick back Stihl Bar, very light and easy starter, makes very quick work of even big logs if you know how to keep it sharp(I used to work in forestry) I have felled very big trees with this no problem. Looking for £85 plus post or collect or swaps.
Can deliver both a petrol cost
