Nick's big sale

NickD

Retro Guru
Feedback
View
Mixture of stuff here, mainly road, but a few MTB bits.

Frames:

Saracen Rufftrax, with no-name cro-mo rigid fork 18". £SOLD

Black 531 road frame. Decalled as a Ken Bird, but according to the man himself it is not one of his frames, he refinished it for a previous owner (his shop was local to me, so I went and asked) 22"- £35 posted

Red 531 road frame, decalled as an Eddy Merckx, rear hanger has been cut off at some point and there is a replacement one on there now, complete with quite a nice headset 23" - £35 posted

Bits:

Dotek road cranks, (C-Record BCD) Nos - have been mounted then removed, the drive side removal thread is not perfect, but I have run a crank remover through it and it threads in fine. 170mm. £7 posted

Shimano 600 cranks - non drive side arm taper is knackered, I am including an SR arm in the same style as a replacement, the original arm will be there too for completeness. Chainrings have plenty of life left, nice looking cranks. 170mm £12 posted

Shimano 600 levers, Super Record style drilled levers. I really like the way these look. All the hoods have perished, and should be considered in need of replacement - £7 posted for the pair with clamps, £5 posted for the pair without.

Shimano RX 100 aero levers, I think 2 of these are NOS, one is used. Clamp and hood is missing on the used one. £12 posted for all three.

Early 90's Shimano 600 and Dura ace, one of each 600 is worn, Dura Ace has no hood, no clamp for either. £6 posted for the pair

105 STI LH lever (for FM) seems to work fine £9 posted

RSX STI both levers, gummed up inside and don't shift. A google search says they suffer from this and can be flushed out. Don't know if they are 7 or 8 speed. £10 the pair SOLD

Shimano RX100 FM no clamp bolt £5 posted

Shimano 500 (I think) FM £4 posted

STX FM 31.8mm, top pull. Clamp and cable bolts missing. £5 posted

Suntour EDGE FM £5 posted

Shimano 600 FM (x2) £5 posted each

Shimano Exage 300EX RM, NOS (mounted but never used) £10 posted

Shimano 600 rear mech (x2) good working condition £7 posted each

Shimano 200EX (?) RM £5 posted

Alivio RM absolutely filthy, but all there £6 posted

Pair of Shimano 600 brakes one recessed nut fitting, one not (to suit the red frame) £10 posted

Shimano Exage brakes (NOS, mounted but never used) £10 posted

Shimano friction shifters x2 £3 posted each

Shimano (600 I believe) 7 speed index shifters £8 posted

Shimano 600 stem, some marks on top 1 inch, £8 posted

Steel MTB stem, with wheel thingy, needs a coat of paint 1 1/8 £6 posted

Kalloy Uno stem 1 1/8 £8 posted

STX 1 1/8 threaded headset, used for approx 3 months (in 1998!) £7 posted SOLD

Sakai drop bars - £6 posted

Purple bar ends, fairly scratched - £3 posted

Pair of hoods £ first to ask for them with some levers gets them

Offers welcome, especially for bulk buy. I will be at the Lincoln ride next weekend if you want to pick up in person, and Dalby the week after.

Swaps (mainly for Campag road stuff & XT & XTR off road stuff) will be considered. My list of wants is a bit too big to go here!

Pics below:

24-11-08001.jpg


24-11-08002.jpg


24-11-08003.jpg


24-11-08004.jpg


24-11-08005.jpg


24-11-08006.jpg


24-11-08007.jpg


24-11-08008.jpg


24-11-08009.jpg


24-11-08010.jpg


24-11-08011.jpg


24-11-08012.jpg


24-11-08013.jpg


24-11-08014.jpg


24-11-08015.jpg


24-11-08016.jpg


24-11-08017.jpg


24-11-08018.jpg
 
Konaglider":2z6jpasy said:
Hi, what size bar clamp on Shimano 600 stem, 25.4/26.0?

It's an internal clamp stem, so difficult to measure. My calipers say 25.8, and the bars on the bike were 25.4, so 25.4 it is!
 
If you can confirm that the Ken Bird frame has

1) Race not touring geometry
2) 27,2 seat tube
3) Non-seized Bottom Bracket
4) Tubes that aren't rusty
5) Built for 700C not 27"

I'll take it.
 
do you have a rough date on the early 600 stuff (including the cranks and drilled shifters)

I'm looking for most of a groupset: front & rear mechs, cranks, levers and shifters.

also what size are the clamps on these? I'll measure my frame this weekend.

and how much to posted for the whole groupset:
Shimano 600 levers, Super Record style drilled levers with clamps £7
Shimano 600 cranks £12
Shimano 600 FM £5 posted
Shimano 600 rear mech £5
Shimano friction shifters £3
free hoods :)
 
dbmtb":3hpz1vv0 said:
If you can confirm that the Ken Bird frame has

1) Race not touring geometry
2) 27,2 seat tube
3) Non-seized Bottom Bracket
4) Tubes that aren't rusty
5) Built for 700C not 27"

I'll take it.

1) Not sure - but it's got mudguard eyes, so I would suggest the latter
2) Yup
3) Yup
4) Two patches of surface rust on the chainstays
5) 27" I'm afraid

I could have just said no, but I thought it may answer other's questions too :D
 
stem length?

Still interested in stem, forgot to ask what LENGTH stem is, length from where centre of bars would be to centre of main long bolt
 

Latest posts

Back
Top