modern road q

[jamabikes]

hi chaps! any idea if an 8 or 9 speed cassette will fit on a 10 speed wheel?

 

[mikeekim89]

i'd say so, with a spacer

 

[jamabikes]

cheers chap.

 

[fatfixie]

If Shimano no spacer required

If campag- will not work :-(

Andy

 

[jamabikes]

even better! shimano 10 speed.

 

[cannondale king]

as the man above said if shimano 8/9speed freehubs also fit 10spd and vise versa as the cassettes just get narrower to fit the freehub.

but campag is just a pain as there 10spd is totaly seperate entity to its 8/9spd systems :cry: shame as i really campag but if i get a 9spd set up and then wanna go 10spd its gona be costly :cry: :cry: :cry:

 

[jamabikes]

i'm going tother way. ten speed bike to 9 speed.

 

[dbmtb]

Depends on the hub.

If it's a Dura-Ace hub that's more than a couple of years old, or an Ultegra-105 level wheelset (WH-R7800,R7801,R600,R601, R5600, R560 IIRC) then it won't.

 

[fatfixie]

Depends on the hub.

If it's a Dura-Ace hub that's more than a couple of years old, or an Ultegra-105 level wheelset (WH-R7800,R7801,R600,R601, R5600, R560 IIRC) then it won't.

It will with a teeny tiny spacer on the freehub before fitting cassette- this stops the big sprocket hitting the spokes....

Andy

 

[fatfixie]

as the man above said if shimano 8/9speed freehubs also fit 10spd and vise versa as the cassettes just get narrower to fit the freehub.

but campag is just a pain as there 10spd is totaly seperate entity to its 8/9spd systems :cry: shame as i really campag but if i get a 9spd set up and then wanna go 10spd its gona be costly :cry: :cry: :cry:

Campag 9 and 10 are intercompatible (and 11speed). it's only 8 (and 7 ) speed cassette hubs that aren't

Andy