Maverick SC32 forks, hub and wheels.

[Andy R]

Maverick SC32 forks in superb condition, recently serviced and with Suspension Experts seal heads fitted (red ano).
These are 120mm travel, 188mm straight steerer tube with starnut fitted and only have one very small area of cable rub (shown).
Currently set-up for a 26" wheel but can be spaced down to allow use with a 29" wheel or, for that matter, 27.5" or a fatbike wheel.

I'm after £165 for these....SOLD

I also have a new/unused black 32H Maverick 24mm hub suitable for these forks or the DUC 32.

£40 SOLD

I have a 29er travel reduction kit - £15 or £10 with the forks. SOLD

Two wheels built on Maverick hubs - one 26" Mavic 319, silver DB spokes. New bearings, wheel runs straight and true, no dents or flat spots just a few minor stone chips.

£50

Mavic 719 29", black DB spokes, bearings slightly rough but still fine to use (and bearings are cheap as chips anyway) runs true and again has no flat spots or dents, just minor stone chips.

£45

I'll take some wheel photos tomorrow and add them.

Paypal or bank transfer please.

 

[jimo746]

is that a 15mm axle on the Maverick forks?

 

[ajantom]

Re:

Nope, it's their own proprietary size. 24mm I think.

 

[jimo746]

Re:

ah yes, it does say that in the ad for the hub.

 

[magas]

interesting forks; PM sent

 

[Andy R]

Re:

Forks, hub and travel reduction kit now SOLD.

 

[Andy R]

Re:

Maverick hub on Mavic 317, silver DB 2.0/1.8mm spokes.

Runs true, wheel bearings recently renewed, no dents or flat spots - just a few small stone chips, like black rims get.
Has Stan's tape and tubeless valve fitted.
Will happily run fairly wide tyres - I was using a Hans Dampf (tubeless)

 

[shedobits]

Re:

Hi Andy,

I'd be interested in one of the hubs if you decide to split a wheel, also any other Maverick stuff that you may have.

Cheers

 

[Andy R]

Ok - I'll bear that in mind about the hubs. I don't have any other Maverick stuff, unfortunately.