Manitou 4's Spares/Repair - SOLD

ultimecia

Retro Guru
Feedback
View
A set of manitou 4's in poor condition!

Most of the bolts are seized, with allen heads rounded.... I suppose with drilling the crown could be removed, brake posts could be used

Steerer and crown are ok, bolts move fine, threads good. The steerer is 150mm with 30mm of thread on there,

RH stantion is not moving, seal looks very corroded, maybe the elastomers are decayed and holding it in there? Not sure, the bolt is removed from the bottom but no movement.....

LH leg moves free, obviously seal is corroded and perished, but the bolt on the bottom is rounded so needs drilling,

The LH elastomer stack is intact though! elastomers on, the adjuster on top moving freely

The stantions and lowers themselves look good, and could be used once freed, stickers are intact, typical "leant up" scratches on the side, but logos and text all nice

The stantions themselves are not worn much, some seal scratching on the RH leg, but the coating seems good on both,

more detailed pics cann be taken if needed heres a few simple ones....

Looking for £10 with £2.50 postage :?:
 

Attachments

  • 25082011127.webp
    25082011127.webp
    71.6 KB · Views: 359
  • 25082011128.webp
    25082011128.webp
    106.4 KB · Views: 359

Latest posts

Back
Top