Magura Brake help

[Easy_Rider]

undo the top bolt and move that pin round so it rests on the inside of the fork brace and the bracket is vertical, tighten up the bolt.

I've had maguras on bombers before and that is where the pin rests.

 

[craiga]

There is a good forum on the magura web site. If you post on there a magura techie will help.

 

[skinnyboy]

Swap the mounts over and get some new crossover lines and you should be green mate.

 

[jimmy5willy]

Those annoying pins that get snagged in the brace are now on the inside, you just can't really see them in the pic.
Am gonna have another bash at switching bits round tonight. Here's hoping...
I notice that's Tintin40's are on upside-down, so that's another idea.

 

[Easy_Rider]

Those annoying pins that get snagged in the brace are now on the inside, you just can't really see them in the pic.
Am gonna have another bash at switching bits round tonight. Here's hoping...
I notice that's Tintin40's are on upside-down, so that's another idea.

From the pictures it looks like they are resting on the fork leg. It should be on the inside of the fork brake. Loosen the bolt and move it round.

 

[Elmo]

swap the mounts over from side to side and keep the QR on the left hand side.

 

[russ77]

swap the mounts over from side to side and keep the QR on the left hand side.

Exactly what I did after bashing my head against a wall for two evenings. I'll get a photo in the morning if you like?

 

[jimmy5willy]

Don't worry about the photo it's all sorted now. Mounts are on the wide setting and although the rear set needs wearing in, everything should be fine.

Cheers for all the help guys.