Lots of VERY cheap wheels. Now listed individually

[ForestHill]

Right, no interest in job lot so individual listings now.

If anyone wants all the wheels you can have them for £35.

Pickup in Forest Hill for everything. Will post cranks or cassette for cost of postage.

1. Maillard Hubs on (I assume) Rigida rims (stickers have come off). 700C
6 speed freewheel. Spin well, but could possibly do with a bit of love.
With Maillard skewers.
http://imgur.com/a/eEQR0
£15

2. Maillard/Rigida set 2. Rear needs a new axle, front has a solid one.
Freewheel spins well.
£10
http://imgur.com/a/zpBFM

3. Shimano 600 hub on Rigida rim
Needs an axle and probably some truing.
£7
http://imgur.com/a/rYRMG

4. 27" Weinmann hub on Maillard rim. Freewheel is a bit sticky, and may or may not be sorted with oil. Decent quality though, came off a nice Raleigh 531.
£5
http://imgur.com/a/UCgKe

5. Set of 700C from a Peugeot I think. Not sure of brand, but they have those 'pitted' rims.
Need attention.
£10
http://imgur.com/a/kkzpQ

6. Very good condition 26" set. Pretty much unused. Not the finest quality but work.
£10
http://imgur.com/a/7CGhl

7. Very rough Maillard rear wheel. Sticky freewheel.
£4
http://imgur.com/a/3UjZQ

 

[KermitGKona88]

Are the 2 top right with tyres on a matching pair :?: If so could I have a picture of them please :?:

Many thanks

Mark

 

[ForestHill]

Yep, here they are. These are 26", and have barely been used as far as I can tell. Nothing special but in VERY good condition.

 

[KermitGKona88]

Hi

Thanks for that, to my poor old eyes they looked 700c

Sorry

Cheers

Mark

 

[ForestHill]

Bump for individual listings.

 

[flimflam_machine]

I need a rear 27" wheel so I'm interested in #4. Since it has no axle could you check out the state of the bearing surfaces and let us know. Also, do you happen to have a tool for removing that freewheel? Looks like it might need a Park FR-4 or equivalent.

 

[ForestHill]

I don't have the tool unfortunately, otherwise I'd take it off. It's a very large diameter tool needed, but should be fairly standard as it didn't come off some weird chinese beater.
The freewheel might be ok with a bit of oil in it, it's just sticky at the moment.
I'll check the surfaces.

 

[Dead Rats]

sorry, posted in error