Looking for cups to fit Bates B.A.R. 1948 (bottom bracket)

[juwelie]

!!!!!!!I have now posted this in the correct Section!!!!!
Hi,
I hope there's somebody out there who can help me with some cups and maybe a bottom bracket and if I'm really lucky you might have the chainset as well ? But cups alone will do fine !

These cups are 26 TPI just so you know.
thank you
Elie

 

[Takingabreak]

Williams cottered cranks are usually available on ebay reasonably priced.

Also, you might do better posting this in the Road section rather than the mountain bike section.

 

[juwelie]

Williams cottered cranks are usually available on ebay reasonably priced.

Also, you might do better posting this in the Road section rather than the mountain bike section.

Hi there,
thank you, I only noticed after posting that I was in the wrong section.

I first should find the Cups before I can buy any cranks as the cups decide what follows,
regards
Elie

 

[Takingabreak]

Are you sure the thread is 26tpi and not 24?

This place has both but I thought 26 was only for Raleigh bikes

http://www.cyclesofyesteryear.com/cycle ... repart.htm

You would then need a suitable length spindle.

 

[juwelie]

Are you sure the thread is 26tpi and not 24?

This place has both but I thought 26 was only for Raleigh bikes

http://www.cyclesofyesteryear.com/cycle ... repart.htm

You would then need a suitable length spindle.

Hi, yes very sure, as i found some brandnew ones but as they are
Internal cups and the shell is smaller then standard ones i need to either find outboard cups or find a smaller spindle. But when the spindle is smaller there is a risque that the arms hit the Chainguards.

Thank you for the link, i will definitely try it
Regards
Elie