Splatter Paint
Retrobike Rider
- Feedback
- View
As pictured in this thread: viewtopic.php?f=6&t=325336&start=10 on Page 2.
You get: Frame, forks, Impact Headset, Velocity Stem, dog collar, seat clamp, seat post.
Price is £75 + postage at cost.
With the exception of the wheels and tyres, all the other parts could be up for sale if you want a bundle deal. In fact I could be tempted to sell it all bar the wheels in one lump - certainly less faff! I do have a dreadful set of wheels and tyres you could have for nowt if you bought the whole lot, though they are utter crap.
There is some surface rust in places, the worst was on the top of the drive-side chainstay where some pillock ran it without a chainstay protector. I've rubbed this back to bare metal and just put some black enamel paint at the moment. With a Shark Fin or neoprene cover you'll mostly not see it - and stop the same thing happening again :facepalm: The Impact Headset had some surface rust, so I took it out the frame, rubbed it down and gave it a squirt with some rattle-can silver. I also put some 1/4" bearings in as the previous owner was using 3/16" :shock: , the bearing surface seemed ok though.
My PC is out of action at the mo' so re-sizing photos is a pain. If you want more detailed shots, PM your e-mail address and I'll get some to you. If you live local to me (Woking, Surrey) you're welcome to come and try it for size. 19" is my preferred Kona frame size and I'm 5'10" tall.
SP
You get: Frame, forks, Impact Headset, Velocity Stem, dog collar, seat clamp, seat post.
Price is £75 + postage at cost.
With the exception of the wheels and tyres, all the other parts could be up for sale if you want a bundle deal. In fact I could be tempted to sell it all bar the wheels in one lump - certainly less faff! I do have a dreadful set of wheels and tyres you could have for nowt if you bought the whole lot, though they are utter crap.
There is some surface rust in places, the worst was on the top of the drive-side chainstay where some pillock ran it without a chainstay protector. I've rubbed this back to bare metal and just put some black enamel paint at the moment. With a Shark Fin or neoprene cover you'll mostly not see it - and stop the same thing happening again :facepalm: The Impact Headset had some surface rust, so I took it out the frame, rubbed it down and gave it a squirt with some rattle-can silver. I also put some 1/4" bearings in as the previous owner was using 3/16" :shock: , the bearing surface seemed ok though.
My PC is out of action at the mo' so re-sizing photos is a pain. If you want more detailed shots, PM your e-mail address and I'll get some to you. If you live local to me (Woking, Surrey) you're welcome to come and try it for size. 19" is my preferred Kona frame size and I'm 5'10" tall.
SP
