having been forced recently to re-evaluate my life, it's time for this one to go to a new home. any other bits seen in the pictures will be up for sale soon, if you're interested, enquire.
1994 Kona AA frame, 19 inch, impact headset, velocity stem and seat post . good condition - i can also fit a 113mm UN51 BB if the buyer so wishes.
for this little lot, i shall open the bidding at £70 posted, £60 collected
FRAME SOLD!
Marzocchi XC51 forks - stripped back and polished by me - some bits bear the brake bosses could use some further polishing attention, but the main legs get a good shine when buffed up. rode well for the few short hops i did with them. 170mm 1" 1/8 ahead steerer. £30 posted
club Roost bars. as pictured, £10 posted
i-beam stem, 1" 1/8, as pictured, 10 posted
ATB crankset - right arm is a deore LX M550, left is a 500LX. could do with a quick brasso-ing but generally in good nick. some blue paint on the back side of the spider. rings not included. £10 posted
all the mechs are £6 posted. the STX fitted to the AA is a 31.8, as NOS. the other two are as pictured. the STX-RC front is a 26.8. both fronts are bottom pull.
1994 Kona AA frame, 19 inch, impact headset, velocity stem and seat post . good condition - i can also fit a 113mm UN51 BB if the buyer so wishes.
for this little lot, i shall open the bidding at £70 posted, £60 collected
FRAME SOLD!
Marzocchi XC51 forks - stripped back and polished by me - some bits bear the brake bosses could use some further polishing attention, but the main legs get a good shine when buffed up. rode well for the few short hops i did with them. 170mm 1" 1/8 ahead steerer. £30 posted
club Roost bars. as pictured, £10 posted
i-beam stem, 1" 1/8, as pictured, 10 posted
ATB crankset - right arm is a deore LX M550, left is a 500LX. could do with a quick brasso-ing but generally in good nick. some blue paint on the back side of the spider. rings not included. £10 posted
all the mechs are £6 posted. the STX fitted to the AA is a 31.8, as NOS. the other two are as pictured. the STX-RC front is a 26.8. both fronts are bottom pull.
