icantthinkofausername
Senior Retro Guru
- Feedback
- View
Firstly is my 16.5" Maxlight XC2 in Mocca Brown, will include the FSA seatpin in the pics (27.2). Since I have stripped it I have had the BB faced and chased so it is ready for Hollowtech usage. I bought the frame off here a couple of weeks ago but it is to small.. I was hoping I would fit but I don't so Im looking to get my money back.
Im looking for £120 posted.
Secondly is my Kona A (previously owned by SingleSpeedStu on STW -more on this later) It is a Full Suspension Single Speed. The chain Tension can be altered by the sliding dropouts. The frame pivots around the BBshell so the chain stays tight too. The frame is from 2005 and is fitted with the spares I had in the shed. Highlights include Hope Mini Brakes, Bombers, Cane Creek S3 headset and Continental Tyres. I had the rear brake serviced last year by Hope but the front could do with a service soon. It has a SS rear hub and a Shimano front and is running a 32x16 ratio. You can have the choice between the yellow flats pictured and a pair of Eggbeater C's. To protect the Bearing SSS has invented a plastic/rubber mud guard to cover them, which works well. All of the bushes and bearings are all OK. I will sell with a replacement drop out which allows you to run it as a 1x9 but you have to use a full length outer. Pricewise something around £400 posted.
If you think the prices are too high make me an offer, especially as there is a lovely Blur on STW
Send me a PM for more pics/ a spec list and anything else really! 
Im looking for £120 posted.
Secondly is my Kona A (previously owned by SingleSpeedStu on STW -more on this later) It is a Full Suspension Single Speed. The chain Tension can be altered by the sliding dropouts. The frame pivots around the BBshell so the chain stays tight too. The frame is from 2005 and is fitted with the spares I had in the shed. Highlights include Hope Mini Brakes, Bombers, Cane Creek S3 headset and Continental Tyres. I had the rear brake serviced last year by Hope but the front could do with a service soon. It has a SS rear hub and a Shimano front and is running a 32x16 ratio. You can have the choice between the yellow flats pictured and a pair of Eggbeater C's. To protect the Bearing SSS has invented a plastic/rubber mud guard to cover them, which works well. All of the bushes and bearings are all OK. I will sell with a replacement drop out which allows you to run it as a 1x9 but you have to use a full length outer. Pricewise something around £400 posted.
If you think the prices are too high make me an offer, especially as there is a lovely Blur on STW
Send me a PM for more pics/ a spec list and anything else really! 
