suburbanreuben
Old School Grand Master
I bought this frame on a whim a few weeks back but my heart just isn't in it. Even my hardtails are usually ignored in favour of rigid.
Fitting brand new SKF bearings is the extent of my meddling so far.
The frame is a size large,suitable for 5'10"+ and the geometry is here:
The frame is straight, with no dents, cracks or scratches though the rear triangle has significant paint loss from chain slap etc. The shock is an RP23 in good condition; No air or oil leaks, no marks on the shaft and the propedal appears to work as intended. The rebound knob is broken and just swivels when turned. However, rebound can be adjusted by using an allen key or similar tool.
Head tube is 1 1/8" straight.rear dropout spacing is 135mm
I'm after £275 ,including postage, seat clamp and a scruffy carbon post.
Fitting brand new SKF bearings is the extent of my meddling so far.
The frame is a size large,suitable for 5'10"+ and the geometry is here:
The frame is straight, with no dents, cracks or scratches though the rear triangle has significant paint loss from chain slap etc. The shock is an RP23 in good condition; No air or oil leaks, no marks on the shaft and the propedal appears to work as intended. The rebound knob is broken and just swivels when turned. However, rebound can be adjusted by using an allen key or similar tool.
Head tube is 1 1/8" straight.rear dropout spacing is 135mm
I'm after £275 ,including postage, seat clamp and a scruffy carbon post.
