Wonder if anyone has any actual experience of doing this? I'm not even too clear on the spacing of said cassette, although the information here > http://www.bikepro.com/products/rear_de ... rrder.html would indicate it be 4.8mm given these Mavic cassettes were designed for ZAP.
I have tried indexing a set of 8sp record ergos, 5mm spaced Sachs cassette and Mavic 840 mech in the past. This failed dismally, assume the mech would've been the issue here.
Believe that the GAN team may have used Campag Ergos, campag rear mechs along with a campag exa-drive block (or custom spaced mavic) on a 571/2 rear hub. Source for this is tears for gears > http://www.tearsforgears.com/2010/04/2- ... ubaix.html
Also read here that GAN may have used sachs ergos (campag ergos with a shimano spaced 'disc' I believe) with a complete MAvic setup.
Basically, anyone any ideas!
I have tried indexing a set of 8sp record ergos, 5mm spaced Sachs cassette and Mavic 840 mech in the past. This failed dismally, assume the mech would've been the issue here.
Believe that the GAN team may have used Campag Ergos, campag rear mechs along with a campag exa-drive block (or custom spaced mavic) on a 571/2 rear hub. Source for this is tears for gears > http://www.tearsforgears.com/2010/04/2- ... ubaix.html
Also read here that GAN may have used sachs ergos (campag ergos with a shimano spaced 'disc' I believe) with a complete MAvic setup.
Basically, anyone any ideas!