How to work out what axle I need

[CC Rider]

I have a late '80s wide flange Campag hub wheel that I would like to fit to a newish frame but the axle is too short.
The new frame measures 131mm inside and 141mm outside and the axle is about 10mm too short.
I tried my LBS but they said there are too many variables and I'd be better off getting a new wheel - kinda defeats the point! So, are there all sorts of different threads I need to think about or will a 'standard' 10mm hollow/QR compatible axle be alright?

 

[pigman]

You need a Campag. The thread is a gnats different if you try to screw the cones onto Shimano et al.

I had some and sold some on here, I'll check later whether I have any left

 

[Takingabreak]

This article might help https://sheldonbrown.com/frame-spacing.html

Sheldon suggests about 11mm longer than the frame spacing. So something in the region of 141 - 142mm should be ok

Your new frame is designed for a 130mm over lock nut sized rear hub. So not only will you need a longer axle but you will also need some spacers

 

[CC Rider]

Thank you both.
Pigman; if you have something that would work that'll be great - fingers crossed!

 

[pigman]

Sorry, rears have all gone, front axles only are left

 

[CC Rider]

That's a shame.
I really appreciate your help and wonder, do you think either of these will work ...?
https://www.ebay.co.uk/itm/356013151502 I'm confused by the 173mm overall length and "ideal for 130mm + rear spacing".
https://www.ebay.co.uk/itm/403770275379?var=673677063016 It's 26TPI; the same as the NOS Campag one.

 

[Takingabreak]

I would go for the 141mm wheels one with something like this as a spacer, depending on which size spacer you need

https://ebay.us/m/WhL8UE

Edit-your first link is an axle for nuts rather than quick release skewer

 

[CC Rider]

Re. the solid axle option ... doh! Well spotted and thank you
Have gone for the 141mm Wheels one and will see what next when I rebuild the wheel. Hopefully plain sailing!