Other than the few spoke hole areas being cracked, the main 'cracks' are hairline cracks propagating from the inner edge where it is bonded to the Ti tube. OFten opposite or close to opposite each other. I also noticed it tends to be (i.e. afaik always) on the ones where the Alu has a mottling on it, streaks running in line of the cracking. where the Alu is not like that, they don't seem to have the problem. Of course just my experience personally and of pictures I've seen.)bluedazzler":epvhu2iu said:these hubs are known to crack at the flange right?.. this is probably due to over tensioned spokes...