- Feedback
- View
First up, apologies it's not a proper retro, but I cannot seem to get Kiran's gears shifting properly at both top and bottom of the cassette - it's either one or the other and then it runs out as if it's pulling/releasing too much cable per shift :?
Set up is:
m770 shifters
m770 rear mech (tried two with various jockeys - OEM, Tacx, KCNC)
Various cassettes including m770, m760, m970 and SRAM XO
Few chains, new and used, KMC 9SL, SRAM, Shimano XTR
Swapped from ordinary cables to i-Link, no change
Two OEM mech hangers and a new BETD
The only thing I haven't swapped (yet) is the shifters themselves, nothing else has made any difference. It's very much like the time I mounted a gear cable the wrong side of the clamp bolt (some road mechs gave you two options to work with both 7 and 8 speed without changing shifters).
Am I missing something? The frame's ally so shouldn't be bent (although I am checking now)!
Set up is:
m770 shifters
m770 rear mech (tried two with various jockeys - OEM, Tacx, KCNC)
Various cassettes including m770, m760, m970 and SRAM XO
Few chains, new and used, KMC 9SL, SRAM, Shimano XTR
Swapped from ordinary cables to i-Link, no change
Two OEM mech hangers and a new BETD
The only thing I haven't swapped (yet) is the shifters themselves, nothing else has made any difference. It's very much like the time I mounted a gear cable the wrong side of the clamp bolt (some road mechs gave you two options to work with both 7 and 8 speed without changing shifters).
Am I missing something? The frame's ally so shouldn't be bent (although I am checking now)!