FS: Various Road and MTB Bits

[tuttonp]

A recent garage clearout has resulted in the following surplus bits and bobs

Road

Titanium Square Taper Bottom bracket, 103mm width so primarily for the early Shimano Low Profile Chainsets, comes complete with a set of low miles sealed bearings and Ti threaded cups which have some wear to the peg holes (pretty certain they're Italian Thread but I'm happy to be corrected) - £30 plus postage

Cinelli 140mm Quill stem - £15 plus postage

Dura Ace 172.5mm R\H Crank Spider (no rings) circa 1980 - £5 plus postage. Would suit anyone's shed wall, its where mine has sat for the last 8 years!!!

Time Road Pedals x2 (Sport and Criterion from memory) c/w cleats (one set has a little repair work - re: blob of ally weld to the pedal) - £10 the pair plus postage.

Shimano Ultegra SPD-R Pedals (no cleats) - £15 plus postage

Cinelli road bars - 1x Giro D'Italia 64-42, 1x 64-40 (both 26mm Centre Tube) - £5 each collected

Profile Project X 1" Quill Aero Tri Bars, this is the 'wing style bars c\w built in Tri bars in the centre and also comes with matching low weight brake levers - £20 plus postage

MTB

Black Control Tech 135mm (approx) 0 deg Rise Quill Stem for 1" Threaded Forks - £15 plus postage SOLD

Boxed, unused Hope Mono Front Hub (Non Disc) - No idea what this should sell for so I'll put £40 plus post and make it subject to offers Pending - Southbound

Kona Project 2's Non-disc 1 1/8" Threaded 158mm from top of the bottom race to the top of the steerer tube. There is damage to the thread at approx 137mm from the bottom race (200mm from the top), so would suit a tall bugger or a shorta*se like me - £15 plus postage

Mavic XC717 Black 32H Rim. Brand New, unused (Was going to be used with the Hope Mono) - £10 collection only Pending - Southbound

Mavic front Wheel - 217 SUP Rim, DK Grey Shimano Non-Disc Hub, DT Swiss Snowflake Lacing!!! - £15 collection only

I'm really not keen on posting the wheel or Rim as I don't have suitable packaging and wouldn't want it arriving oval (pre-ride!!).

I've put plus postage as I would like the buyer to choose how they'd like it sent (Plain Parcel Post, Recorded, Special Delivery, etc). Hopefully that's acceptable.

Pics available on request

 

[Zappa]

Hi

Is the Mavic XC717 rim the disc version and collection from where?


Cheers

 

[tuttonp]

Apologies, knew I'd miss something!!

The rims are all non-disc

I am based in Bristol and work in Trowbridge, so anywhere between the two really

 

[tuttonp]

Offers??

 

[stavros222]

Could I get pics of the Control Tech stem please?

 

[tuttonp]

I'll take some tomorrow night and post them up as soon as

 

[tuttonp]

All, apologies for the delay. Pics of most of the kit here - http://picasaweb.google.co.uk/Tuttonp/RetroParts

If you need high res I have 8mb originals I can mail out.


Offers on the rest??

 

[tuttonp]

Bump

Control Tech Stem - Sold

 

[South Bound]

I have a mate in Trowbridge - don't suppose you would do £40 for the Hope Hub and the 717 if I can get them collected from you? (Would probably have to give him something to collect!)

 

[tuttonp]

I'd do the pair for 45 but the only day I'm in Trowbridge this week is Friday. I'm in hospital for the next 3 days and London on Thursday