FS Mavic Crossmax Disc/disk? Mavic D321 and X317

[Student Bob]

Set of Mavic Crossmax Disc/k wheels, all new bearings on the rear - with one ride on them, new freehub and bushings. Front wheel bearings are sound as a pound.

These wheels have been used, and the spokes are a little tatty – I think I’ve pictured the worst of it, but structurally they’re fine – although one front spoke is a little bent.

£150 posted SOLD


And here's some other stuff - some of it's already been listed in the <97 section, some hasn't and it's more modern... Anyway...

Pair of Mavic X317, 32h, brand new, disk only, pics below, note that one is still in it’s cellophane wrapping and anything that looks like a mark is actually a reflection. £35 posted

Pair Mavic D321 32h rims. £35 posted SOLD

Hope XC front hub, 32h, ISO disc mount. Black. Bearings feel fine and yer normal QR fixin’. £25 posted

Hope discs – in the defunct and rare 5 arm rotor stylee. One is 185mm, the other is 165mm. According to my vernier callipers, there’s 0.1mm of wear on these beauties. £15 each posted?

165mm

185mm

 

[steelhardtailer]

Pm sent

 

[cchris2lou]

do u know the weight of the cross max ?

 

[Grannygrinder]

.

Can that hope front hub be converted to 20mm?
If it can and its 32 hole i'll have it. Take £23?

 

[Student Bob]

do u know the weight of the cross max ?

Aye, it's in the region of 1750-1800gr. Personally, I find that pretty weighty, but then I handicap myself by running inner tubes for a needlessly extra 170gr...

Can that hope front hub be converted to 20mm?

Man... that's a question... officially no. The internal diameter of the stock bearings is too small.... however, if you can source bearings that have a larger internal diameter, then people have converted this hub (well, not this exact hub...) to 20mm. Worth a google I'd say, as they are indeed 32h.

 

[claw]

PM sent