spacehopper
Senior Retro Guru
- Feedback
- View
Prices include postage.. other pics available on request.
Pace RC36 Pro Class 2 Carbon Fibre 100mm 26" Suspension Forks £160
to fit 26" Wheels
100mm Coil Sprung Travel
185mm 1 1/8th straight steerer
Disc only, and also fitted with a genuine pace brake hose clamp..
3.58 Lbs on my scales.
These forks can be run with V-brakes.. but you will need to source the correct mounts..
good external cosmetic condition. (see picture)
have been fully cleaned and restored internally.
New Damper seal kit,
New Damper rod
New Damper piston / Check Valve
New Dust seals
New Base seals
New Spring
Rebuilt with Pace RC7 Grease and Motorex Damper oil.
Spare Set of seals also included!
Star nut also fitted.
like most of the pace forks from this era.. the main springs were unfortunatley broken
These have been replaced with a Single Rockshox Dart Spring,(same 100mm travel) which works fantastically.. the small bump sensitivity of these forks is amazing!
the broken bits of old spring and spacers are also included
Turner Complete dw-link 'Bushings and Seals' rebuild kit includes: £28
4 dw Main Pivot Seals
4 dw Main Pivot Bushings
4 Rocker Tip Seals
4 Rocker Tip Bushings
2 Main Pivot Seals
2 Main Pivot Bushings
This Kit is for the following dw-link XC Models (model year 2009+):
Flux 26
5-Spot 26
Flux alloy 27.5
Burner 27.5
Sultan 29
Czar V1
Unused but have been sat in storage for a while..
Turner 5-spot Linkages And Bolts £33
From a 2011 Model, but will fit other DW-link years as well..
2 Main rockers
2 dw-links
all have cosmetic wear (see pictures), but are in good physical condition.
2 DW-link Bolts (no washers)
2 Main piot bolts
2 rocker / Swingarm bolts
all usable but have been used.. please pay close attention to the pictures for their condition
Main Pivot journal bearing / axle (pretty worn anodizing)
DW Link journa bearing / axle (worn Anodizing)
rocker / Swingarm journal bearing / axle
all of the above journal bearings / axles will 'work' but the anodizing is worn as pictured.. (particularily on the main rocker pivot)
if your current bits are completely trashed.. and these are polished up with fine grade wet n dry then autosol, and then looked after, they should extend the life of your frame a bit longer..
26" Fox Fork Lowers - No stickers - £38
15mm axle (axle included)
to fit 32mm stanchion forks
I think theyre 2009 model year, but will fit others..
Low Friction seals fitted, theyve done 5-10 rides.. so in pretty much as new condition
used condition as pictured.. paint work is not perfect, but presentable.
Bike Parts Bundle Job Lot £28
3 Red Onza Ules Grips
Shimano M600 Brake Levers
2 Shimano m600 v-brakes (one is mising the springs)
Deore HT2 Bottom Bracket, used.. but usable
headset, to fit 44mm headtube and tapered steerer forks, bearings still smooth.
works components 32t Shimano offset bolt pattern chainring Narrow widedeore 12 speed shifter, new but does not have a mount
One-up seatpost activation mechanism
small Evoc Frame bag
condition as pictured, and im not going to split this random bundle.. its all in a box ready to go..
Sqlab 621 Ergolux Active 2.0 Saddle £42
21 CM Wide
Mounted to a bike but never used
Deore XT / SLX 10 Speed Drivetrain Bundle £58
Ideal for a small kids bike build!
includes..
Shimano Deore XT Rear mech with Zee Short cages for extra ground clearance..
(the short cages work fine with a hardtail, but you may not have enough chain growth in the 36T with a full suspension bike, please cycle the suspension through its travel before riding to check!)
Shimano Deore XT 10 Speed Shifter, Band on, no indicator, used optislck cable
Shimano SLX 10 speed 11-36 Cassette (with XT alloy lock ring, (this is where the majority of the weight saving is between the SLX / XT Cassettes)) fits HG style Freehub
Shimano SLX Chain
all of the above works together.
Fox Dps Piston Tools and full set of volume spacers £20
have been used once but are still in good condition
Pace RC36 Pro Class 2 Carbon Fibre 100mm 26" Suspension Forks £160
to fit 26" Wheels
100mm Coil Sprung Travel
185mm 1 1/8th straight steerer
Disc only, and also fitted with a genuine pace brake hose clamp..
3.58 Lbs on my scales.
These forks can be run with V-brakes.. but you will need to source the correct mounts..
good external cosmetic condition. (see picture)
have been fully cleaned and restored internally.
New Damper seal kit,
New Damper rod
New Damper piston / Check Valve
New Dust seals
New Base seals
New Spring
Rebuilt with Pace RC7 Grease and Motorex Damper oil.
Spare Set of seals also included!
Star nut also fitted.
like most of the pace forks from this era.. the main springs were unfortunatley broken
These have been replaced with a Single Rockshox Dart Spring,(same 100mm travel) which works fantastically.. the small bump sensitivity of these forks is amazing!
the broken bits of old spring and spacers are also included

Turner Complete dw-link 'Bushings and Seals' rebuild kit includes: £28
4 dw Main Pivot Seals
4 dw Main Pivot Bushings
4 Rocker Tip Seals
4 Rocker Tip Bushings
2 Main Pivot Seals
2 Main Pivot Bushings
This Kit is for the following dw-link XC Models (model year 2009+):
Flux 26
5-Spot 26
Flux alloy 27.5
Burner 27.5
Sultan 29
Czar V1
Unused but have been sat in storage for a while..

Turner 5-spot Linkages And Bolts £33
From a 2011 Model, but will fit other DW-link years as well..
2 Main rockers
2 dw-links
all have cosmetic wear (see pictures), but are in good physical condition.
2 DW-link Bolts (no washers)
2 Main piot bolts
2 rocker / Swingarm bolts
all usable but have been used.. please pay close attention to the pictures for their condition
Main Pivot journal bearing / axle (pretty worn anodizing)
DW Link journa bearing / axle (worn Anodizing)
rocker / Swingarm journal bearing / axle
all of the above journal bearings / axles will 'work' but the anodizing is worn as pictured.. (particularily on the main rocker pivot)
if your current bits are completely trashed.. and these are polished up with fine grade wet n dry then autosol, and then looked after, they should extend the life of your frame a bit longer..


26" Fox Fork Lowers - No stickers - £38
15mm axle (axle included)
to fit 32mm stanchion forks
I think theyre 2009 model year, but will fit others..
Low Friction seals fitted, theyve done 5-10 rides.. so in pretty much as new condition
used condition as pictured.. paint work is not perfect, but presentable.

Bike Parts Bundle Job Lot £28
3 Red Onza Ules Grips
Shimano M600 Brake Levers
2 Shimano m600 v-brakes (one is mising the springs)
Deore HT2 Bottom Bracket, used.. but usable
headset, to fit 44mm headtube and tapered steerer forks, bearings still smooth.
works components 32t Shimano offset bolt pattern chainring Narrow widedeore 12 speed shifter, new but does not have a mount
One-up seatpost activation mechanism
small Evoc Frame bag
condition as pictured, and im not going to split this random bundle.. its all in a box ready to go..

Sqlab 621 Ergolux Active 2.0 Saddle £42
21 CM Wide
Mounted to a bike but never used

Deore XT / SLX 10 Speed Drivetrain Bundle £58
Ideal for a small kids bike build!
includes..
Shimano Deore XT Rear mech with Zee Short cages for extra ground clearance..
(the short cages work fine with a hardtail, but you may not have enough chain growth in the 36T with a full suspension bike, please cycle the suspension through its travel before riding to check!)
Shimano Deore XT 10 Speed Shifter, Band on, no indicator, used optislck cable
Shimano SLX 10 speed 11-36 Cassette (with XT alloy lock ring, (this is where the majority of the weight saving is between the SLX / XT Cassettes)) fits HG style Freehub
Shimano SLX Chain
all of the above works together.

Fox Dps Piston Tools and full set of volume spacers £20
have been used once but are still in good condition
Last edited: