- Feedback
- View
Morning All,
After a bit of a shifty around I have a pair of 2011 Rockshox Recon Race (powerbulge & alloy steerer) forks spare.
These are single air with motion control & lockout and can be set at 80/100/120mm travel by adjusting the internal spacer.
Currently set at 100mm.
These forks are both disc and v brake compatible. Please note the studs for v brakes are not included but available from any SRAM dealer for circa £10.
The forks are in very good over all condition. I am a bit anal about servicing so have had their lower leg oil changed regularly and the seals flushed after every ride - told you I was anal!
The only notable points are that the steerer has a couple of light marks from where my LBS seated the crown race. These cause no issue just me being open about them!
Price is firm at £80 posted SOLD pending payment
Forks will be packed in a suitable fork box and will be sent with the additional spacer to change the travel down to 80mm.
The pic below shows the fork in 120mm setting but as above are currently in 100mm mode.
Any questions just ask.
Regards,
MArk
After a bit of a shifty around I have a pair of 2011 Rockshox Recon Race (powerbulge & alloy steerer) forks spare.
These are single air with motion control & lockout and can be set at 80/100/120mm travel by adjusting the internal spacer.
Currently set at 100mm.
These forks are both disc and v brake compatible. Please note the studs for v brakes are not included but available from any SRAM dealer for circa £10.
The forks are in very good over all condition. I am a bit anal about servicing so have had their lower leg oil changed regularly and the seals flushed after every ride - told you I was anal!
The only notable points are that the steerer has a couple of light marks from where my LBS seated the crown race. These cause no issue just me being open about them!
Price is firm at £80 posted SOLD pending payment
Forks will be packed in a suitable fork box and will be sent with the additional spacer to change the travel down to 80mm.
The pic below shows the fork in 120mm setting but as above are currently in 100mm mode.

Any questions just ask.
Regards,
MArk