Frame from KINESIS - any good ?

[mattr]

You'll only need to touch it with the sand paper, a bit of 1200 grit or something.

 

[kyle888]

Re:

Flat it with 800 wet and dry at first get all the coating off, then go over with 1200 then possibly 1500 if you want to make it easier to polish back up. You need a good cutting paste polish and a lot of elbow grease unless you use an electric mop. I have a similar kenisis framed merlin although not with the fancy chainstay bridge.

Kyle

 

[popo00]

Re: Re:

Flat it with 800 wet and dry at first get all the coating off, then go over with 1200 then possibly 1500 if you want to make it easier to polish back up. You need a good cutting paste polish and a lot of elbow grease unless you use an electric mop. I have a similar kenisis framed merlin although not with the fancy chainstay bridge.

Kyle

do you mind to post a picture of your bike?

I need to make a stickers for that but dont know what to choose, as it is Radon bike , and old stickers are gone...

 

[popo00]

so here is my new bike with basic gear quickly attatched just to try the frame and how it feels...It is smaller frame as I was planning...ride is bit different but looks good anyway after few minutes of todays ride

will change the seat for sure as color doesnt match

bike needs new decals, dont know what to put on it yet maybe I stick to name it Radon as it was named in the factory

new frame is 1.8 kg in weight with the back shifter hook and bottle holder

 

[kyle888]

Re:

Here's a link to the thread for my bike. viewtopic.php?f=21&t=326634

I ordered new decals off ebay only a few quid just search vinyl stickers letters and choose the font and words!

Selling my frame soon as ive just swapped to a GT avalanche 1.0 frame which has a disc mount rather than the faffy adaptor.

Kyle