ugo.santalucia
Retro Guru
170 mm cranks, rings are not original: they are 49 T Stronglight Zicral and a 39 T TA.
The drive side crank arm has the teeth that engage with the titanium bolt damaged, therefore I have made a metal washer to mount on the bolt to fit it (visible in the photo). It works flawlessly and it's not visible.
This needs a 103 mm axle, which Shimano no longer makes, therefore I am supplying with a bottom bracket of the correct length and taper (JIS) which has done roughly 200 miles.
It is probably still the lightest chain set Shimano ever made, in good conditions except for the damage described above. Chainrings bolts have been copper-slipped and are not seized. Perfectly usable and still looking the part. The mounting bolts are the original Shimano titanium ones.
In view of the damage and the fact that the rings are not original, I am happy to take 25 pounds if collected from SW London or 30 if delivered to a UK address.
You get everything you see in the photo, except for the oak table... :?
The drive side crank arm has the teeth that engage with the titanium bolt damaged, therefore I have made a metal washer to mount on the bolt to fit it (visible in the photo). It works flawlessly and it's not visible.
This needs a 103 mm axle, which Shimano no longer makes, therefore I am supplying with a bottom bracket of the correct length and taper (JIS) which has done roughly 200 miles.
It is probably still the lightest chain set Shimano ever made, in good conditions except for the damage described above. Chainrings bolts have been copper-slipped and are not seized. Perfectly usable and still looking the part. The mounting bolts are the original Shimano titanium ones.
In view of the damage and the fact that the rings are not original, I am happy to take 25 pounds if collected from SW London or 30 if delivered to a UK address.
You get everything you see in the photo, except for the oak table... :?
