Complete rebuild of 1990's MTB to 2016 XT spec 1x10

NewRider":fo4t17ef said:
I am thinking of possibly replacing this with a stainless steel bearing perhaps to provide more free movement but without the flex. Any thoughts?

If you are going to be spending any effort on the brakes you might as well just replace them completely.. they probably will never offer satisfactory stopping power
 
Re:

Phil is probably right. It takes time and many saddle hours to gradually season up the sit bones and strengthen the muscles that will eventually support you from saddle-soreness. When I started riding again in 2010/11 after a gap of around 15 years or so, it was real savage on the ass and lower back. The subjective choice of options for saddle, padded shorts and as higher-volumed tyres as the Apollo can fit, can help you along the way there. Padded shorts don't necessarily make saddle time more comfy. For me, the robust yet very comfy range of 3/4 Singletrack or other 3/4 shorts from Endura teamed with unpadded tights underneath suffice. The more regular riding you get in, the more you find out what kind of set-up/choice of kit and components works for you.
 
Frame has no v brake studs.... but it wouldn't be beyond the OP's skills to colour match a fork that does, and the front brake is the one that matters
 
Re:

Lovely job, it makes no economical sense, but a lovely job none the less. :D

Regarding the brakes, most mountain bikes have bosses to fit either cantilever brakes, like this:

220px-Cantilever_brake.JPG


Or on later rim braked frames, V-brakes, like this:

100_5599-500x500.jpg


Because of the short distance between the pivot and the brake shoe the set-up is fairly rigid and when well set up they have very positive action with plenty of stopping power.

Calliper brakes, like yours, are more commonly found on road bikes. On a road bike the narrower tyres mean that the whole calliper can be very compact and the arms of the calliper relatively short, compact and rigid. Modern dual pivot calliper brakes are a big improvement on the earlier single pivot brakes, like yours, and have a very positive feel with plenty of stopping power.

P1050396-768x513.jpg



However, on an MTB with fat tyres, the whole calliper has to be a lot bigger with longer arms to fit around the tyres and reach the rims, which means that there is a lot more distance between the brake shoe and the pivot, which means there's more flex and the brakes feel less positive and ultimately less powerful as some of the power is wasted flexing the brake arms rather than pressing the shoes to the wheel rims.

You can get some better long reach calliper brakes that should be an improvement on the ones you have, but would in all likelihood still lose out to well set up cantilever or V-brakes: http://www.wiggle.co.uk/tektro-r559-ext ... liper-set/

Having said all that, if you're happy with what you have and they're doing the job I wouldn't worry too much. It's easy to forget that you get spoilt. I was perfectly happy with the dreadful single pivot calliper brakes on my road bike, it was only after I had a mountain bike with cantilever brakes that I had a comparison and realised how bad they were. :?
 
Re:

I reckon NewRider would be perfectly capable of whittling up some kind of disc brake or other combo in addition... ;)
 
I may have missed it but haven't noticed any mention of decals. Surely if you have access to a water jet, you can make some custom vinyl cut decals.

Have you considered water jet cutting the decals? That would be super unique.
 
Great thread! Good luck on your rides and may the bike serve you many many happy kilometers (or miles :) )

Regarding breaks; I Think groovyblueshed is on to something...
 
just read it and great job,the only part i dont like is the seat,time and effort is all u need and a little bit of money well done
 

Latest posts

Back
Top