Right, take two on this. I removed it from sale last time but this time it’s staying.
It’s a Univega I think. Around 1996.
Unfortunately the original owner has passed on so details are light on the ground but apparently the frame was purchased on a trip to Colorado in the early 90s.
Pace RC30 gen 3 fork with a gen 2 crown on the front and a Chris King headset. I think, correct me if I’m wrong.
It’s pretty light as a full frameset.
The paint job is pretty cool TBh.
Frame measurements
Seat tube:
C-c 16 inches
C-t 18 inches
Top tube:
C-c 22 inches
I can’t be sure but I don’t think it’s ever been ridden. Only evidence of use is some paint flaking where a front mech has been added and some small paint chips under the chain stays.
No serial numbers on the frame.
I assume it’s steel
Pace fork is 1 inch threadless. Steerer is 200mm long. Includes an 1 1/8 shim
It will also come with a generic seatpost and I think the diameter is 26mm
Shown as a rolling chassis in the last photo but wheels not included.
Anyways, based on the fork, headset and wicked paint job I’m asking for £350 collected from Poynton, SK12.
If you’re interested but think I’m off on my price please let me know.
Last photo shows it as a rolling chassis. I think it would be a nice build
It’s a Univega I think. Around 1996.
Unfortunately the original owner has passed on so details are light on the ground but apparently the frame was purchased on a trip to Colorado in the early 90s.
Pace RC30 gen 3 fork with a gen 2 crown on the front and a Chris King headset. I think, correct me if I’m wrong.
It’s pretty light as a full frameset.
The paint job is pretty cool TBh.
Frame measurements
Seat tube:
C-c 16 inches
C-t 18 inches
Top tube:
C-c 22 inches
I can’t be sure but I don’t think it’s ever been ridden. Only evidence of use is some paint flaking where a front mech has been added and some small paint chips under the chain stays.
No serial numbers on the frame.
I assume it’s steel
Pace fork is 1 inch threadless. Steerer is 200mm long. Includes an 1 1/8 shim
It will also come with a generic seatpost and I think the diameter is 26mm
Shown as a rolling chassis in the last photo but wheels not included.
Anyways, based on the fork, headset and wicked paint job I’m asking for £350 collected from Poynton, SK12.
If you’re interested but think I’m off on my price please let me know.
Last photo shows it as a rolling chassis. I think it would be a nice build
Attachments
-
IMG_1685.webp422.5 KB · Views: 23
-
IMG_1686.webp317.3 KB · Views: 12
-
IMG_1688.webp164.4 KB · Views: 11
-
IMG_1692.webp80.7 KB · Views: 12
-
IMG_1694.webp441.7 KB · Views: 12
-
IMG_1693.webp77.8 KB · Views: 12
-
IMG_1691.webp260.2 KB · Views: 12
-
IMG_1699.webp339.7 KB · Views: 12
-
IMG_1700.webp262.7 KB · Views: 18
-
IMG_1718.webp455.9 KB · Views: 25